Images are examples, some edited with AI. The technical data are authoritative. AI notice
Solenoid valve 5/2-way bistable G1/4 CPE18-M2H-5J-1/4 - Festo 163763
The CPE18-M2H-5J-1/4 delivers 1500 l/min standard nominal flow within 18 mm width as a 5/2-way valve, bistable. 110 V AC coil (3 VA pull-in, 2.4 VA holding), IP65. Pilot air is taken internally, operating pressure 2 to 10 bar, G1/4 supply port. c UL us - Recognized (OL) certified.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
18 mm width and 1500 l/min flow: the CPE18-M2H-5J-1/4 from the Festo CPE18 series works as a 5/2-way valve, bistable. As an impulse valve it keeps the last switching position even without a signal, a short pulse per direction is enough.
Benefits
- 1500 l/min standard nominal flow at just 18 mm width and 8 mm nominal size.
- The pilot stage of the CPE18-M2H-5J-1/4 takes its air internally, operating pressure 2 to 10 bar.
- The CPE18-M2H-5J-1/4 changes over in 13 ms.
- The 110 V AC coil of the CPE18-M2H-5J-1/4 draws 3 VA pull-in, 2.4 VA holding, 100 % duty cycle, connection type C plug pattern to EN 175301-803.
- IP65 degree of protection with plug socket to IEC 60529, c UL us - Recognized (OL) certification.
- Port assignment 1, 2, 3, 4 and 5 in G1/4, pilot ports M5.
Application and mounting
The CPE18-M2H-5J-1/4 is connected via the G1/4 threaded ports and fastened through its through-holes in any mounting position. The CPE18-M2H-5J-1/4 runs on compressed air to ISO 8573-1:2010 [7:4:4], lubricated operation is possible but must then be maintained.
Technical data
| Type | CPE18-M2H-5J-1/4 |
|---|---|
| Festo part number | 163763 |
| Valve function | 5/2-way, bistable |
| Type of actuation | electrical |
| Width | 18 mm |
| Standard nominal flow rate | 1500 l/min |
| Operating pressure | 2 to 10 bar |
| Design | piston spool |
| Certification | c UL us - Recognized (OL) |
| Marine classification | see certificate |
| Degree of protection | IP65 with plug socket to IEC 60529 |
| Nominal size | 8 mm |
| Sealing principle | soft |
| Mounting position | any |
| Manual override | non-detenting, detenting with accessory |
| Type of piloting | piloted |
| Pilot air supply | internal |
| Flow direction | non-reversible |
| Valve position identification | label holder |
| Overlap | positive overlap |
| Duty cycle | 100 % |
| Maximum positive test pulse with 0 signal | 3300 µs |
| Maximum negative test pulse with 1 signal | 3100 µs |
| Coil characteristics | 110 V AC, 50/60 Hz, pull-in power 3 VA, holding power 2.4 VA |
| Permissible voltage fluctuations | -15 % / +10 % |
| Operating medium | compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for all further operation) |
| Vibration resistance | transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 2 - moderate corrosion stress |
| Medium temperature | -5 to 50 °C |
| Ambient temperature | -5 to 50 °C |
| Product weight | 270 g |
| Electrical connection | plug pattern type C to EN 175301-803 |
| Type of mounting | with through-hole |
| Pilot exhaust air port 82 | M5 |
| Pilot air port 12 | M5 |
| Pneumatic connection, port 1 | G1/4 |
| Pneumatic connection, port 2 | G1/4 |
| Pneumatic connection, port 3 | G1/4 |
| Note on materials | RoHS compliant |
| Seal material | NBR |
| Housing material | die-cast aluminium |
| Exhaust function | can be throttled |
| Pilot exhaust air port 84 | M5 |
| Pilot air port 14 | M5 |
| Pneumatic connection, port 4 | G1/4 |
| Pneumatic connection, port 5 | G1/4 |
| Changeover time | 13 ms |
| Weight | 0.27 kg |
| Manufacturer | Festo |
| Hersteller-Nr | CPE18-M2H-5J-1/4 |
| EAN | 4052568135195 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | G 1/4 |
| Nominal size DN [mm] | 8 |
| Medium | Compressed air |
| Function | 5/2 bistable |
| Flow rate [l/min] | 1500 |
| Actuation type | Electrical |
| Norm | DIN EN 175301-803 |
| Operating conditions | EN 60068-2-27, EN 60068-2-6, ISO 8573-1 |
| Operating voltage | 110 V AC |
| Series | CPE18 |
| Betriebsdruck max [bar] | 10 |
| Pneumatic connection | G1/4 |
| Protection rating | IP65 |
| Temperature (max.) | 50 |
Downloads
Accessories
Solenoid valve 5/2-way bistable QS-10 CPE18-M2H-5J-QS-10 - Festo 163779
Item FES-163779Solenoid valve 5/2-way bistable QS-8 CPE18-M2H-5JS-QS-8 - Festo 163775
Item FES-163775Solenoid valve 5/2-way bistable QS-10 CPE18-M2H-5JS-QS-10 - Festo 163783
Item FES-163783Solenoid valve 5/2-way monostable G1/4 CPE18-M2H-5L-1/4 - Festo 163762
Item FES-163762Alternatives
Solenoid valve 3/2-way normally open monostable G1/4 CPE18-M1H-3OL-1/4 - Festo 163140
Item FES-163140Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.




