Images are examples, some edited with AI. The technical data are authoritative. AI notice
Solenoid valve 3/2-way normally closed monostable QS-10 CPE18-M2H-3GL-QS-10 - Festo 163777
The CPE18-M2H-3GL-QS-10 delivers 1000 l/min standard nominal flow within 18 mm width as a 3/2-way valve, normally closed. Pilot air is taken internally, operating pressure 2.5 to 10 bar, QS-10 supply port. 110 V AC coil, type C plug pattern to EN 175301-803, IP65.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The CPE18-M2H-3GL-QS-10 solenoid valve from the Festo CPE18 series switches up to 1000 l/min standard nominal flow at a width of only 18 mm, valve function 3/2-way, normally closed. Without a signal port 2 stays exhausted, with a signal it is pressurised. The valve thus controls single-acting cylinders or switches blow-off air.
Benefits
- 1000 l/min standard nominal flow at just 18 mm width and 8 mm nominal size.
- The pilot stage of the CPE18-M2H-3GL-QS-10 takes its air internally, operating pressure 2.5 to 10 bar.
- Quick cycling: 28 ms switch-on and 18 ms switch-off time.
- 110 V AC coil with 3 VA pull-in, 2.4 VA holding, 100 % duty cycle, type C plug pattern to EN 175301-803, IP65 with plug socket.
- Port assignment 1 and 2 in QS-10, 3 in G1/4, pilot ports M5.
- Corrosion resistance class 2, vibration and shock tested to EN 60068-2-6 and EN 60068-2-27, ambient temperature -5 to 50 °C.
Application and mounting
Lines are connected to the QS-10 push-in connectors and the CPE18-M2H-3GL-QS-10 is bolted through its through-holes, the mounting position can be chosen freely. The CPE18-M2H-3GL-QS-10 runs on compressed air to ISO 8573-1:2010 [7:4:4], lubricated operation is possible but must then be maintained.
Technical data
| Type | CPE18-M2H-3GL-QS-10 |
|---|---|
| Festo part number | 163777 |
| Valve function | 3/2-way, normally closed, monostable |
| Type of actuation | electrical |
| Width | 18 mm |
| Standard nominal flow rate | 1000 l/min |
| Operating pressure | 2.5 to 10 bar |
| Design | piston spool |
| Type of reset | pneumatic spring |
| Certification | c UL us - Recognized (OL) |
| Marine classification | see certificate |
| Degree of protection | IP65 with plug socket to IEC 60529 |
| Nominal size | 8 mm |
| Sealing principle | soft |
| Mounting position | any |
| Manual override | non-detenting, detenting with accessory |
| Type of piloting | piloted |
| Pilot air supply | internal |
| Flow direction | non-reversible |
| Valve position identification | label holder |
| Overlap | positive overlap |
| Switching time off | 18 ms |
| Switching time on | 28 ms |
| Duty cycle | 100 % |
| Maximum positive test pulse with 0 signal | 3300 µs |
| Maximum negative test pulse with 1 signal | 3100 µs |
| Coil characteristics | 110 V AC, 50/60 Hz, pull-in power 3 VA, holding power 2.4 VA |
| Permissible voltage fluctuations | -15 % / +10 % |
| Operating medium | compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for all further operation) |
| Vibration resistance | transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 2 - moderate corrosion stress |
| Medium temperature | -5 to 50 °C |
| Ambient temperature | -5 to 50 °C |
| Electrical connection | plug pattern type C to EN 175301-803 |
| Type of mounting | with through-hole |
| Pilot exhaust air port 82 | M5 |
| Pilot air port 12 | M5 |
| Pneumatic connection, port 1 | QS-10 |
| Pneumatic connection, port 2 | QS-10 |
| Pneumatic connection, port 3 | G1/4 |
| Note on materials | RoHS compliant |
| Seal material | NBR |
| Housing material | die-cast aluminium |
| Weight | 0.24 kg |
| Manufacturer | Festo |
| Hersteller-Nr | CPE18-M2H-3GL-QS-10 |
| EAN | 4052568135331 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| For hose OD [mm] | 10 |
| Nominal size DN [mm] | 8 |
| Medium | Compressed air |
| Function | 3/2 closed monostable |
| Flow rate [l/min] | 1000 |
| Actuation type | Electrical |
| Norm | DIN EN 175301-803 |
| Operating conditions | EN 60068-2-27, EN 60068-2-6, ISO 8573-1 |
| Operating voltage | 110 V AC |
| Series | CPE18 |
| Betriebsdruck max [bar] | 10 |
| Pneumatic connection | QS-10 |
| Protection rating | IP65 |
| Temperature (max.) | 50 |
Downloads
Accessories
Solenoid valve 3/2-way normally closed monostable G1/4 CPE18-M2H-3GL-1/4 - Festo 163761
Item FES-163761Solenoid valve 3/2-way normally closed monostable QS-10 CPE18-M2H-3GLS-QS-10 - Festo 163781
Item FES-163781Solenoid valve 3/2-way normally closed monostable QS-8 CPE18-M2H-3GLS-QS-8 - Festo 163773
Item FES-163773Solenoid valve 3/2-way normally closed monostable G1/4 CPE18-M2H-3GLS-1/4 - Festo 163765
Item FES-163765Solenoid valve 3/2-way normally open monostable QS-10 CPE18-M2H-3OL-QS-10 - Festo 163776
Item FES-163776Alternatives
Solenoid valve 5/3-way mid-position closed QS-10 CPE18-M1H-5/3G-QS-10 - Festo 170259
Item FES-170259Solenoid valve 5/3-way mid-position exhausted G1/4 CPE18-M1H-5/3E-1/4 - Festo 170249
Item FES-170249Solenoid valve 3/2-way normally closed monostable G1/4 CPE18-M1H-3GL-1/4 - Festo 163141
Item FES-163141Solenoid valve 5/3-way mid-position closed G1/4 CPE18-M1H-5/3G-1/4 - Festo 170247
Item FES-170247Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.




