Images are examples, some edited with AI. The technical data are authoritative. AI notice
Solenoid valve 3/2-way normally open monostable QS-4 CPE10-M1BH-3OL-QS-4 - Festo 196852
The CPE10-M1BH-3OL-QS-4 delivers 190 l/min standard nominal flow within 10 mm width as a 3/2-way valve, normally open. Electrical: 24 V DC with 1.28 W, 2-pin plug connection. Operating pressure 2.5 to 8 bar with internal pilot air, switching time 14 ms on and 14 ms off.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
With 190 l/min standard nominal flow at 10 mm width, the CPE10-M1BH-3OL-QS-4 solenoid valve puts a lot of air capacity into a narrow valve row. The valve function is 3/2-way, normally open. In the normal position port 2 is pressurised, the signal shuts off the supply and exhausts the consumer.
Benefits
- 190 l/min standard nominal flow at just 10 mm width and 4 mm nominal size.
- Internal piloting from port 1 (QS-4), operating pressure 2.5 to 8 bar.
- The CPE10-M1BH-3OL-QS-4 switches on in 14 ms and off in 14 ms.
- IP65 with plug socket and 2-pin plug connection, 24 V DC coil with 1.28 W.
- Port assignment 1 and 2 in QS-4, 3 in M7, pilot ports M3.
- The CPE10 series meets CRC 2 and is vibration and shock tested to EN 60068-2-6 and EN 60068-2-27.
Application and mounting
The CPE10-M1BH-3OL-QS-4 is connected via the QS-4 push-in connectors and fastened through its through-holes in any mounting position. The CPE10-M1BH-3OL-QS-4 runs on compressed air to ISO 8573-1:2010 [7:4:4], lubricated operation is possible but must then be maintained.
Technical data
| Type | CPE10-M1BH-3OL-QS-4 |
|---|---|
| Festo part number | 196852 |
| Valve function | 3/2-way, normally open, monostable |
| Type of actuation | electrical |
| Width | 10 mm |
| Standard nominal flow rate | 190 l/min |
| Operating pressure | 2.5 to 8 bar |
| Design | piston spool |
| Type of reset | pneumatic spring |
| Certification | c UL us - Recognized (OL) |
| Marine classification | see certificate |
| Degree of protection | IP65 with plug socket to IEC 60529 |
| Nominal size | 4 mm |
| Sealing principle | soft |
| Mounting position | any |
| Manual override | non-detenting, detenting with accessory |
| Type of piloting | piloted |
| Pilot air supply | internal |
| Flow direction | non-reversible |
| Valve position identification | label holder |
| Overlap | positive overlap |
| Switching time off | 14 ms |
| Switching time on | 14 ms |
| Duty cycle | 100 % with holding current reduction |
| Maximum positive test pulse with 0 signal | 1200 µs |
| Maximum negative test pulse with 1 signal | 900 µs |
| Coil characteristics | 24 V DC, 1.28 W |
| Permissible voltage fluctuations | -15 % / +10 % |
| Operating medium | compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for all further operation) |
| Vibration resistance | transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 2 - moderate corrosion stress |
| Medium temperature | -5 to 50 °C |
| Ambient temperature | -5 to 50 °C |
| Electrical connection | 2-pin |
| Type of mounting | with through-hole |
| Pilot exhaust air port 82 | M3 |
| Pilot air port 12 | M3 |
| Pneumatic connection, port 1 | QS-4 |
| Pneumatic connection, port 2 | QS-4 |
| Pneumatic connection, port 3 | M7 |
| Note on materials | RoHS compliant |
| Seal material | NBR |
| Housing material | die-cast aluminium |
| Weight | 0.06 kg |
| Manufacturer | Festo |
| Hersteller-Nr | CPE10-M1BH-3OL-QS-4 |
| EAN | 4052568159627 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| For hose OD [mm] | 4 |
| Nominal size DN [mm] | 4 |
| Medium | Compressed air |
| Function | 3/2 open monostable |
| Flow rate [l/min] | 190 |
| Actuation type | Electrical |
| Operating conditions | EN 60068-2-27, EN 60068-2-6, ISO 8573-1 |
| Operating voltage | 24 V DC |
| Series | CPE10 |
| Betriebsdruck max [bar] | 8 |
| Pneumatic connection | QS-4 |
| Protection rating | IP65 |
| Temperature (max.) | 50 |
Downloads
Accessories
Solenoid valve 3/2-way normally open monostable M5 CPE10-M1BH-3OL-M5 - Festo 196851
Item FES-196851Solenoid valve 3/2-way normally open monostable M7 CPE10-M1BH-3OL-M7 - Festo 196917
Item FES-196917Solenoid valve 3/2-way normally open monostable M5 CPE10-M1BH-3OLS-M5 - Festo 196854
Item FES-196854Solenoid valve 3/2-way normally open monostable QS-4 CPE10-M1BH-3OLS-QS-4 - Festo 196855
Item FES-196855Solenoid valve 3/2-way normally open monostable QS-6 CPE10-M1BH-3OLS-QS-6 - Festo 196856
Item FES-196856Alternatives
Solenoid valve 5/3-way mid-position exhausted M7 CPE10-M1BH-5/3E-M7-B - Festo 533143
Item FES-533143Solenoid valve 3/2-way normally closed monostable QS-6 CPE10-M1BH-3GL-QS-6 - Festo 196847
Item FES-196847Solenoid valve 5/2-way bistable QS-6 CPE10-M1BH-5J-QS-6 - Festo 196877
Item FES-196877Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.






