Images are examples, some edited with AI. The technical data are authoritative. AI notice
Controller CECC series 12 inputs 8 outputs CECC-S - Festo 574416
Festo controller CECC-S at a glance: 12 inputs, 8 outputs, fieldbus CANopen, I-Port, IO-Link, Modbus TCP. Programming is done with CODESYS provided by Festo V3, so sequence, motion and communication of the machine can be controlled centrally.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The CECC-S belongs to the Festo CECC series. Programming is done with CODESYS provided by Festo V3, so sequence, motion and communication of the machine can be controlled centrally.
Benefits
- 12 inputs
- 8 outputs
- Fieldbus CANopen, I-Port, IO-Link, Modbus TCP
- Fieldbus interface CAN bus
- CPU processor 400 MHz
- Programming with CODESYS provided by Festo V3
Applications
Used in automation solutions based on the Festo CECC series. Ambient temperature 0 to 55 °C, protection IP20.
Technical data
| Feature | Value |
|---|---|
| Type | CECC-S |
| Festo part number | 574416 |
| Corrosion resistance class CRC | 0 - no corrosion stress |
| Approval | RCM Mark, c UL us - Listed (OL) |
| Note on materials | RoHS compliant |
| Nominal operating voltage DC | 24 V |
| Operating voltage | 20.4 - 30 V DC |
| Current consumption | 100 mA nominal at 24 V DC |
| Maximum power supply | 6 A |
| Ambient temperature | 0 to 55 °C |
| Storage temperature | -25 to 70 °C |
| Relative air humidity | 95%, Non-condensing |
| Degree of protection | IP20 |
| Protection class | III |
| Vibration immunity test | according to EN 61131-2 |
| Shock immunity test | according to EN 61131-2 |
| Electrical connection technology I/O | Socket strip, pitch 3.5 mm |
| Status displays | LED |
| CPU data | processor 400 MHz |
| Digital inputs, number | 12 |
| Digital inputs, switching logic | positive logic (PNP) |
| Digital inputs, fast counter inputs | 2, each with max 180 kHz |
| Digital inputs, input signal delay | 3 ms typical |
| Digital inputs, input voltage/current | 24 V DC |
| Digital inputs, nominal value for TRUE | ≥ 15 V DC |
| Digital inputs, nominal value for FALSE | ≤ 5 V DC |
| Digital inputs, electrical isolation | yes, optocoupler |
| Digital inputs, status display | LED |
| Maximum cable length | 30 m inputs |
| Digital outputs, number | 8 |
| Digital outputs, switching logic | positive logic (PNP) |
| Digital outputs, contact | transistor |
| Digital outputs, output voltage | 24 V DC |
| Digital outputs, output current | 500 mA |
| Digital outputs, electrical isolation | yes, optocoupler |
| Digital outputs, switching frequency | max 1 kHz |
| Digital outputs, short-circuit proof | Yes |
| Digital outputs, status display | LED |
| Protocol | CANopen, I-Port, IO-Link, Modbus TCP |
| Fieldbus interface | CAN bus |
| Field bus, connection system | Sub-D, 9-pin, Plug |
| Field bus interface, transmission rate | 125, 250, 500, 800, 1000 kbit/s, adjustable via software |
| Fieldbus interface, galvanic isolation | Yes |
| USB-interface | USB 1.1 |
| Ethernet, connection plug | RJ45 |
| Ethernet, number | 1 |
| Ethernet, data transmission rate | 10/100 Mbit/s |
| Ethernet, supported protocols | TCP/IP, EasyIP, Modbus TCP |
| Programming software | CODESYS provided by Festo V3 |
| Programming language | instruction list (IL), ladder diagram (LD), to IEC 61131-3, sequential function chart, function block diagram, structured text |
| CE mark (see declaration of conformity) | to EU EMC Directive |
| Certificate issuing authority | UL E239998-D1001 |
| Serial interface, number | 3 |
| Type of serial interface | 2 x RS232 / 1 x RS 485-A/422-A |
| Serial interface, connection system | Plug |
| Serial interface, transmission rate | 300 to 375000 Bit/s |
| IO-Link, protocol | device V 1.0, master V 1.1 |
| IO-Link, communication mode | Configurable via software, device COM1 (4.8 kBaud), COM2 (38.4 kBaud), COM3 (230.4 kBaud), master SIO, COM1 (4.8 kB), COM2 (38.4 kBaud), COM3 (230.4 kBaud) |
| IO-Link, port type | device A, master B |
| IO-Link, Number of ports | device 1, master 1 |
| IO-Link, Process data length OUT | master configurable, 2 - 32 Byte |
| IO-Link, Process data length IN | master configurable, 2 - 32 Byte |
| IO-Link, Min. cycle time | device 3.2 ms, master 5 ms |
| IO-Link, memory | 2 kByte/port |
| IO-Link master, output current | 3.5 A/port |
| IO-Link, connection technology | Cage Clamp, Plug, device 3-pin, master 5-pin |
| IO-Link, communication | C/Q LED green, C/Q LED red |
| IO-Link, ready status display | L+ LED green on, L+ LED green off |
| Encoder inputs, number | 1 |
| Encoder inputs, resolution | 32 bit |
| Encoder inputs, signal range | 5 V differential (RS422) |
| Encoder inputs, max input frequency | 1000 kHz |
| Weight (price list) | 0.28 kg |
| Weight | 0.28 kg |
| Manufacturer | Festo |
| Hersteller-Nr | CECC-S |
| EAN | 4052568223076 |
| Zolltarifnummer | 85371091 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Norm | DIN EN 61131-2, DIN EN 61131-3 |
| Protection rating | IP20 |
| Temperature (max.) | 55 |
Downloads
Accessories
Bus interface module CDPX series CANopen IP20 CDPX-F-CO - Festo 575301
Item FES-575301Software licence CDPX series control technology CDPX-SL-C3 - Festo 576045
Item FES-576045Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.



