3/2-way valve NC, electropneumatic, series 70, G 3/8, 110 V AC, external pilot air, type 517.32.38.E.NC.110A - Riegler 147241

On valve 517.32.38.E.NC.110A an electrical signal gives the command, which is executed by a pneumatic pilot stage. Switching behaviour of valve 517.32.38.E.NC.110A: normally closed (NC), the path to the working port opens when the signal is applied. Valve 517.32.38.E.NC.110A has port G 3/8 female thread and nominal size DN 13.3 mm, flow 2150 Nl/min at 6 bar and Δp 1 bar.

Benefits

• At 6 bar the valve passes 2150 Nl/min with Δp 1 bar and 1560 Nl/min with Δp 0.5 bar.
• With external pilot air (2.5 to 10 bar) the type 517.32.38.E.NC.110A works from -0.99 bar up to 10 bar, vacuum included.
• Medium temperature -10 to 60 °C, ambient -10 to 50 °C.
• Latching manual override.
• Connector and coil 110 V AC, 50/60 Hz are included.

Applications

Typical tasks are single-acting cylinders, blow-off air and piloting downstream valves. The 517.32.38.E.NC.110A can be installed in-line, mounted directly on the cylinder with a special adapter or used as a series valve on multi-base plates and supply strips.