3/2-way valve, green push button, G 1/4", panel hole 30.5 mm, 700 l/min, aluminium

This manually operated 3/2-way valve with a green push button serves as an operating element on control panels, consoles and fixtures. As long as the button is pressed, the valve releases 700 l/min at an operating pressure of 0 to 8 bar, afterwards it exhausts the working port. Mounting is done in a panel hole of 30.5 mm diameter, and all three ports are G 1/4". The pressure inlet may be placed on any port, which simplifies piping inside the cabinet. An aluminium body, a POM spool and NBR seals permit temperatures from -10 to +60 °C.

Benefits

• Direct manual actuation by the green push button without electrical auxiliary power.
• Flow rate of 700 l/min at an operating pressure of 0 to 8 bar.
• Installation in the common panel hole of 30.5 mm diameter.
• Pressure inlet optionally at any of the three G 1/4" ports.
• Aluminium body with POM spool and NBR seals for -10 to +60 °C.

Applications

• Start command for single-acting cylinders at manual workstations.
• Release of blowing air at cleaning stations with up to 700 l/min.
• Operator consoles and cabinet doors with an existing 30.5 mm hole.
• Set-up mode on fixtures where compressed air is required only briefly.