3/2-way selector switch valve, black, 2 positions, G 1/4, 700 l/min, Ø 30.5 mm panel hole - YPC YMV410

The selector switch lets the operator choose between two positions, such as setup and automatic mode, and the valve stays where it is set. This 3/2-way selector valve fits a Ø 30.5 mm panel hole and switches 700 l/min through G 1/4 ports.

Advantages

• Runs without a lubricator on filtered compressed air, lubricated or not, and on inert gases from 0 to 8 bar.
• Supply can be connected to any port, so the same valve can be plumbed as normally open or normally closed.
• Fits a Ø 30.5 mm panel hole, next to electrical control devices of the same size.
• Weighs just 160 g, built from die-cast aluminium body, NBR seals, stainless steel spring, carbon steel plunger.
• Effective area of 16.0 mm² for 700 l/min, enough for small cylinders or as a pilot signal to a larger valve.

Applications

• Switching between manual and automatic mode
• Turning blow-off or sealing air on and off
• Preselecting an operating mode that keeps a single-acting cylinder or a downstream valve pressurised