3/2-way solenoid valve NC, directly operated, media-separated, brass, G 1/4, DN 3, 0 to 10 bar, NBR, 24 V DC, DNV - Riegler 185481

Where a medium has to be released or shut off by a control signal, the 3/2-way solenoid valve MVC.14.MS.24D.N.BD.3.DNV takes on the job. It operates in the range 0 to 10 bar at nominal size DN 3 and is directly operated.

Benefits

• Normally closed (NC): if the voltage drops out, the valve shuts the G 1/4 line.
• Switches from 0 bar: directly operated, no minimum pressure needed, operating pressure up to 10 bar.
• Materials: housing in brass, valve seat in brass, internal parts in brass, thread G 1/4.
• Medium temperature 0 to 80 °C with NBR seals, G 1/4 port.
• Connection for 24 V DC: device connector, type A to DIN EN 175301-803, degree of protection IP 65 (with connector socket fitted), type MVC.14.MS.24D.N.BD.3.DNV.
• Separating diaphragm: the medium never reaches the 24 V DC coil.

Applications

Because the coil system is separated from the medium by a diaphragm, the manufacturer rates the series for critical media as well. Check the resistance of housing and seal to the specific medium beforehand. As a 3/2-way version the series can be used as a diverter or mixing valve. Medium temperatures of 0 to 80 °C are permitted at an ambient of 0 to 55 °C. Driven at 24 V DC, it suits controls that have to shut off on power failure.