3/2-way solenoid valve NC, directly operated, brass, G 1/4, DN 3, 0 to 10 bar, NBR, 230 V AC/DC, ATEX, with 3 m cable - Riegler 185484

The 3/2-way solenoid valve MVC.14.MS.230.N.BD.3.EX controls fluids in plants via an electrical signal at 230 V AC/DC. It operates in the range 0 to 10 bar at nominal size DN 3 and is directly operated.

Benefits

• Fail-safe NC position: without 230 V AC/DC on the coil the flow path stays closed.
• ATEX version according to the manufacturer, observe the marking on the device for conditions of use.
• Switches from 0 bar: directly operated, no minimum pressure needed, operating pressure up to 10 bar.
• Internal parts in brass, housing in brass and seat in brass, DN 3.
• NBR seal material for media from 0 to 80 °C at 0 to 10 bar.
• Connection for 230 V AC/DC: cable, 3 m, degree of protection IP 65 (with connector socket fitted), type MVC.14.MS.230.N.BD.3.EX.

Applications

Because the coil system is separated from the medium by a diaphragm, the manufacturer rates the series for critical media as well. Check the resistance of housing and seal to the specific medium beforehand. As a 3/2-way version the series can be used as a diverter or mixing valve. Medium temperatures of 0 to 80 °C are permitted at an ambient of 0 to 55 °C. Driven at 230 V AC/DC, it suits controls that have to shut off on power failure.