3/2-way mini solenoid valve, direct acting, monostable, NC, flange version, 24 V DC, with 30 cm cable, type MV 1051.2 - Riegler 106642

The direct acting 3/2-way mini solenoid valve, normally closed (NC), switches small pneumatic circuits at 24 V DC with a coil power of only 2.5 W. Operating pressure 0 to 7 bar, switching time 10 to 12 ms (depending on pressure). The valves have a flange design for mounting on single or multiple base plates, two fixing screws and a flange seal are supplied. The coil can be rotated by 180°.

Benefits

• Flow rate 50 Nl/min at 6 bar and Δp 1 bar
• Operating pressure 0 to 7 bar
• Temperature range -10 to 50 °C
• Width 15 mm, height 42 mm, nominal size 1.5 mm
• FPM seals, plastic housing

Applications

As a normally closed 3/2-way valve it only opens the flow path when actuated, typical for single-acting cylinders, blow-off air or switching on a consumer. For pneumatic controls with low air demand, mounted on single or multiple base plates with M5 ports. Medium filtered, unlubricated compressed air.