Hydraulic hose assembly EN 853 2 SN, DN 6, M 12x1.5, pipe connection 6 L, DKO / DKO, 0.8 m

Where a flexible link between two pipe ends is needed, this line to EN 853 of type 2 SN works with DN 6 and 315 bar. It measures 0.8 m, the connecting thread is M 12x1.5, the pipe connection 6 L. It is reinforced with two steel wire braids. Both ends carry the same connection form, so the assembly can be fitted either way round.

Benefits

• working pressure 315 bar at nominal size DN 6
• reinforcement of two steel wire braids to EN 853 2 SN
• temperature range -40 to +100 °C (briefly +120 °C)
• cut to 0.8 m and crimped at both ends, no assembly work of your own is needed
• cover resistant to ozone and weathering
• connecting thread M 12x1.5 for the pipe connection 6 L, DKO / DKO

Applications

The assembly is called for on construction machinery and lifting gear whose cylinders and motors are supplied over fixed line lengths. According to the data sheet hydraulic oils on a mineral oil basis, vacuum (max. -0.83 bar), water, lubricants and fuels are approved.

Standards and conformity

The hose is built to EN 853 as type 2 SN and reinforced with two steel wire braids.