Hydraulic hose assembly EN 853 2 SN, DN 12, M 22x1.5, pipe connection 15 L, DKO / DKO, 1.5 m

The ready-assembled line of type 2 SN to EN 853 carries pressure up to 275 bar at a nominal size of DN 12. It is crimped to a length of 1.5 m and carries thread M 22x1.5 at the ends for the pipe connection 15 L. The reinforcement consists of two steel wire braids. Both ends carry the same connection form, so the assembly can be fitted either way round.

Benefits

• working pressure 275 bar at nominal size DN 12
• reinforcement of two steel wire braids to EN 853 2 SN
• temperature range -40 to +100 °C (briefly +120 °C)
• cut to 1.5 m and crimped at both ends, no assembly work of your own is needed
• cover resistant to ozone and weathering
• connecting thread M 22x1.5 for the pipe connection 15 L, DKO / DKO

Applications

Its place is on hydraulic power units in plant engineering, where the line runs between pump, valve block and cylinder. According to the data sheet hydraulic oils on a mineral oil basis, vacuum (max. -0.83 bar), water, lubricants and fuels are approved.

Standards and conformity

The hose is built to EN 853 as type 2 SN and reinforced with two steel wire braids.