Hydraulic hose assembly EN 853 2 SN, DN 12, M 22x1.5, pipe connection 15 L, DKO / CEL, 0.9 m

With 275 bar working pressure and DN 12, this line to EN 853 of type 2 SN covers the run between two fixed connection points. The overall length is 0.9 m, the thread at the ends M 22x1.5, the pipe connection 15 L. The hose is reinforced with two steel wire braids. The two ends carry different connection forms, so the assembly links two different mating points.

Benefits

• working pressure 275 bar at nominal size DN 12
• reinforcement of two steel wire braids to EN 853 2 SN
• temperature range -40 to +100 °C (briefly +120 °C)
• cut to 0.9 m and crimped at both ends, no assembly work of your own is needed
• cover resistant to ozone and weathering
• connecting thread M 22x1.5 for the pipe connection 15 L, DKO / CEL

Applications

The assembly is called for on construction machinery and lifting gear whose cylinders and motors are supplied over fixed line lengths. According to the data sheet hydraulic oils on a mineral oil basis, vacuum (max. -0.83 bar), water, lubricants and fuels are approved.

Standards and conformity

The hose is built to EN 853 as type 2 SN and reinforced with two steel wire braids.