2/2-way solenoid valve, NBR, -10 to +80, body brass, de-energised open (NO), G 1", 230 V AC, DN 27.5

This 2/2-way solenoid valve switches the air path electrically and needs no manual action at the machine. The connection is G 1" and control is by 230 V AC. The switching function is de-energised open (NO). The operating pressure is stated as 0 to 16 bar. The materials are body brass, internal parts Brass/stainless steel, seal NBR.

Advantages

• Control voltage tolerance plus/minus 10 percent, which makes short supply dips uncritical.
• Media Compressed air, neutral gases, water, neutral low-viscosity media, heating oil, other media on request, so no separate treatment is needed.
• Kv value of 216 l/min, from which the flow rate for the actual pressure drop can be calculated.
• Mounting position with upright and horizontal solenoid (de-energised open (NO): only with upright solenoid), which has to be observed before installation.
• Seals of NBR, matched to the intended medium.

Applications

• Replacement of a defective valve of the same type in existing machines.
• Sequencing of pneumatic axes with connection G 1" in handling equipment.
• Installation in control cabinets with a supply of 230 V AC.
• Control of pneumatic flaps, gates and diverters in conveying equipment.