2/2-way toggle lever valve, both sides, Push-in connector, G 1/4 - Riegler 107020

2/2-way toggle lever valve, both sides, Push-in connector hose 6, G 1/4, PN max. 8 bar, Temp. -20 °C to 80 °C, nickel-plated brass Manually operated toggle valve, 2/2-way types. For all applications where compressed air must be switched on or off quickly and easily or a cylinder operated manually. Designed as a banjo-type valve with a hollow bolt and ring piece. Suitable for screwing directly into the equipment or for panel mounting. Compact type of construction, also ideal where space is restricted.

Standards and origin

• Customs tariff number: 74122000
• Country of origin: IT

About Toggle valves

Toggle lever valves switch compressed air by hand, right at the cylinder or the fixture. They work from 0 to 8 bar and the group covers 29 items in 2/2-way and 3/2-way versions. The banjo bolt design with ring piece lets the valve be screwed straight into the actuator, so no extra manifold block is needed.

What matters when choosing

• 2/2-way or 3/2-way function: the 2/2 version only turns the air on and off, the 3/2 version also exhausts the outlet side, which is what single-acting cylinders need.
• Thread G 1/8 male or G 1/4 male on the screw-in stud, with Thread 2 as G 1/8 female or G 1/4 female on the both-sided versions. The port on the actuator decides.
• Type of connection: threaded port, quick connector or push-in fitting. The quick connector saves assembly time, a threaded port stays the choice where lines are already made up.
• Hose side sizes run 4, 5/3, 6, 6/4, 8, 8/6, 10 and 10/8, plus G 1/8 female and G 1/4 female. The size has to match the installed tubing or the joint will not hold pressure.
• Max. operating pressure of 8 bar and filtered, lubricated compressed air as the medium. Both set the limits, and unfiltered or dry air shortens the life of the NBR seals.

Typical applications

• Manual control of single-acting cylinders on clamping and holding fixtures
• Switching blow-off and air-jet points on and off
• Isolating a single consumer for maintenance without shutting down the main line
• Panel-mounted control points using the panel thread provided
• Simple hand controls at assembly and test benches

Sealing is by NBR and the released medium is filtered, lubricated compressed air. Every valve in this group is made in Italy.