Compressed air hose assembly EN 853 1 SN, DN 25, M 36x2, pipe connection 28 L, DKO / CEL, 0.5 m

The ready-assembled line of type 1 SN to EN 853 carries pressure up to 40 bar at a nominal size of DN 25. It is crimped to a length of 0.5 m and carries thread M 36x2 at the ends for the pipe connection 28 L. The reinforcement consists of one steel wire braid. The two ends carry different connection forms, so the assembly links two different mating points.

Benefits

• working pressure 40 bar at nominal size DN 25
• reinforcement of one steel wire braid to EN 853 1 SN
• temperature range -40 to +100 °C (briefly +120 °C)
• cut to 0.5 m and crimped at both ends, no assembly work of your own is needed
• cover resistant to ozone and weathering
• connecting thread M 36x2 for the pipe connection 28 L, DKO / CEL

Applications

Its place is on hydraulic power units in plant engineering, where the line runs between pump, valve block and cylinder. According to the data sheet compressed air is approved.

Standards and conformity

The hose is built to EN 853 as type 1 SN and reinforced with one steel wire braid.