Compressed air hose assembly EN 853 1 SN, DN 19, M 30x2, pipe connection 22 L, DKO / DKO, 1.2 m

Type 1 SN to EN 853 joins two connection points over 1.2 m at DN 19 and 40 bar working pressure. Thread M 30x2 and pipe connection 22 L define the mating point. The reinforcement consists of one steel wire braid. Both ends carry the same connection form, so the assembly can be fitted either way round.

Benefits

• working pressure 40 bar at nominal size DN 19
• reinforcement of one steel wire braid to EN 853 1 SN
• temperature range -40 to +100 °C (briefly +120 °C)
• cut to 1.2 m and crimped at both ends, no assembly work of your own is needed
• cover resistant to ozone and weathering
• connecting thread M 30x2 for the pipe connection 22 L, DKO / DKO

Applications

It is used in maintenance as a replacement for damaged lines of the same nominal size. According to the data sheet compressed air is approved.

Standards and conformity

The hose is built to EN 853 as type 1 SN and reinforced with one steel wire braid.