Images are examples, some edited with AI. The technical data are authoritative. AI notice

1-ear hose clamp (W1), insert ring, 8.2 - 9.5 mm, PU 10 pcs. - Riegler 114167

Riegler ✓ Original product Brand new Made in Spain

1-ear hose clamp (W1), insert ring, 8.2 - 9.5 mm, PU 10 pcs.

Net
€0.43
excl. VAT
Item RGL-114167
Manufacturer no. 155 B
Minimum order quantity: 10 pieces. This item is supplied in multiples of 10.
Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

1-ear hose clamp with insert ring, Steel bright galvanised (W1), Clamping range 8.2 - 9.5 mm, Belt width 7.8 mm, PU 10 pcs. An absolutely safe all around setting is ensured by the pre-mounted insert ring. Suitably for use with soft and sensitive hose material.

Standards and origin

  • Customs tariff number: 73269098
  • Country of origin: ES

About Hose clamps

Hose clamps hold the hose on the barb and keep the joint from slipping under pressure. They cost little and still decide whether a line stays tight. The group holds 254 articles, from small hose diameters up to industrial hoses with a wide clamping band.

What matters when choosing

  • The clamping range has to cover the outside diameter of the hose once it sits on the barb, not the free hose. If the value falls at the edge of the range, the next size up is the safer choice.
  • Material class is the real selection criterion. Bright zinc-plated and zinc-plated steel (W1) for dry indoor use, chrome steel 1.4016 (W2) and stainless steel 1.4301 (W4) in damp conditions, stainless steel 1.4401 and 1.4404 (W5) under chemical or salt load.
  • Band width sets how the clamping force is spread. Wide bands protect soft rubber hoses, narrow bands fit tight installation positions.
  • Every clamp comes with a recommended tightening torque. Tightening by feel either crushes the hose or fails to reach the sealing force.

Typical applications

  • Securing industrial water, rubber, suction and pressure hoses on hose barbs
  • Cooling water lines on machine tools and power units
  • Compressed air hoses at compressor stations and workshop manifolds
  • Extraction and conveying lines where wide bands must not pinch the hose
  • Outdoor and wet-area installation using clamps in stainless steel 1.4401 or 1.4404

Depending on the version, clamps are made from bright zinc-plated or zinc-plated steel (W1), chrome steel 1.4016 (W2) or stainless steels 1.4301, 1.4401 and 1.4404 (W4 and W5). Part of the range belongs to the blow line and Maxi series.

Technical data

Materialsteel, bright zinc-plated (W1)
Clamping range min.8.2 mm
Clamping range max.9.5 mm
Band width7.8 mm
Weight0.002000
ManufacturerRiegler
Hersteller-Nr155 B
EAN4047322402293
Zolltarifnummer73269098
GPSR HerstellerdatenRiegler & Co. KG, Schützenstraße 27, DE-72574 Bad Urach, www.riegler.de
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
Country of ManufactureSpain

Downloads

Accessories

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day. Ask a question

Customers Who Bought This Item Also Bought