5/3-way solenoid valve, ATEX Ex ia, centre position closed, ATEX approval, G 1/8", 24 V DC

In cycled systems the nominal size decides how fast a cylinder starts. This 5/3-way solenoid valve works with a nominal size of 6 mm at connection G 1/8". It is switched with 24 V DC. The switching function is centre position closed. The materials are body anodised aluminium and plastic, internal parts stainless steel and brass, seal plastic / NBR.

Advantages

• Temperature range of -10 to +70 °C, which covers use in the machine room as well as outdoors.
• Connection G 1/8" and exhaust G 1/8", so the piping follows the existing line network.
• ATEX marking II 2G Ex ia IIC T6 Ga IP65 & II 2D Ex t IIIC T80°C Db IP65 to directive 2014/34/EU.
• Control voltage tolerance plus/minus 10 percent, which makes short supply dips uncritical.
• Media oiled and non-oiled, filtered compressed air, so no separate treatment is needed.

Applications

• Plants operated within the temperature range -10 to +70 °C.
• Replacement of a defective valve of the same type in existing machines.
• Control of double-acting cylinders with an air demand up to 650 l/min.
• Sequencing of pneumatic axes with connection G 1/8" in handling equipment.

Standards and conformity

The valve carries the ATEX marking II 2G Ex ia IIC T6 Ga IP65 & II 2D Ex t IIIC T80°C Db IP65 to directive 2014/34/EU.