5/2-way solenoid valve, 3 to 10 bar, ATEX Ex mb, Air spring, ATEX approval, G 1/8", 24 V DC

A double-acting actuator needs a valve that switches the air path reliably and delivers the required flow. This 5/2-way solenoid valve with connection G 1/8" passes 950 l/min and is controlled with 24 V DC. The actuator can therefore be switched straight from the machine control without an extra pilot stage.

Advantages

• ATEX marking II 2G Ex mb IIC T5 IP65 & II 2D Ex mb tb IIIC T95°C IP65 to directive 2014/34/EU.
• Control voltage tolerance plus/minus 10 percent, which makes short supply dips uncritical.
• Media oiled and non-oiled, filtered compressed air, so no separate treatment is needed.
• Actuation by Air spring, which fixes the direction of response.
• Pressure inlet Port 1, which simplifies the piping.

Applications

• Control of pneumatic flaps, gates and diverters in conveying equipment.
• Cycled feeding and clamping units in fixture building.
• Plants operated within the temperature range -10 to +70 °C.
• Replacement of a defective valve of the same type in existing machines.

Standards and conformity

The valve carries the ATEX marking II 2G Ex mb IIC T5 IP65 & II 2D Ex mb tb IIIC T95°C IP65 to directive 2014/34/EU.