5/2-way solenoid valve, Spring, ATEX approval, G 1/4", 24 V DC, 1800 l/min, nominal size 9 mm

This 5/2-way solenoid valve switches the air path electrically and needs no manual action at the machine. The connection is G 1/4" and control is by 24 V DC. The operating pressure is stated as 2.5 to 10 bar. The materials are body anodised aluminium and plastic, internal parts stainless steel and brass, seal NBR.

Advantages

• Media oiled and non-oiled, filtered compressed air, so no separate treatment is needed.
• Actuation by Spring, which fixes the direction of response.
• Pressure inlet Port 1, which simplifies the piping.
• Flow rate of 1800 l/min, so the connected actuator moves without the valve throttling it.
• Nominal size of 9 mm, which defines the usable cross section of the switching position.

Applications

• Replacement of a defective valve of the same type in existing machines.
• Control of double-acting cylinders with an air demand up to 1800 l/min.
• Sequencing of pneumatic axes with connection G 1/4" in handling equipment.
• Installation in control cabinets with a supply of 24 V DC.

Standards and conformity

The valve carries the ATEX marking II 2G Ex mb IIC T5 IP65 & II 2D Ex mb tb IIIC T95°C IP65 to directive 2014/34/EU.