5/2-way solenoid valve, 2.5 to 8 bar, ATEX Ex ia, Spring, ATEX approval, G 1/4", 24 V DC, 1580 l/min

A double-acting actuator needs a valve that switches the air path reliably and delivers the required flow. This 5/2-way solenoid valve with connection G 1/4" passes 1580 l/min and is controlled with 24 V DC. The actuator can therefore be switched straight from the machine control without an extra pilot stage.

Advantages

• Protection class IP 65 at the solenoid coil, suitable for dusty surroundings.
• Temperature range of -10 to +70 °C, which covers use in the machine room as well as outdoors.
• Connection G 1/4" and exhaust G 1/4", so the piping follows the existing line network.
• ATEX marking II 2G Ex ia IIC T6 Ga IP65 & II 2D Ex t IIIC T80°C Db IP65 to directive 2014/34/EU.
• Control voltage tolerance plus/minus 10 percent, which makes short supply dips uncritical.

Applications

• Replacement of a defective valve of the same type in existing machines.
• Control of double-acting cylinders with an air demand up to 1580 l/min.
• Sequencing of pneumatic axes with connection G 1/4" in handling equipment.
• Installation in control cabinets with a supply of 24 V DC.

Standards and conformity

The valve carries the ATEX marking II 2G Ex ia IIC T6 Ga IP65 & II 2D Ex t IIIC T80°C Db IP65 to directive 2014/34/EU.