Pressure gauge, vertical, 50 mm, range -1 to 0 bar, G 1/4", sheet steel case, class 1.6

Once installed, the pressure gauge indicates the working pressure at the measuring point without auxiliary power. The data also state a scale division of 0.05 bar. Its rating is an indicating range of -1 to 0 bar. In addition the data give the G 1/4" connection thread and the version with sheet steel case, class 1,6.

Benefits

• Indicating range -1 to 0 bar with a scale division of 0.05 bar.
• Case diameter 50 mm for a scale that stays readable from a distance.
• Connection thread G 1/4" at the bottom of the case, read in the vertical position.
• Two scales on the dial, bar on the outside and psi on the inside.
• Protection IP 42 over a temperature range of -20 to +60 °C.
• Supplied as sheet steel case, class 1.6 according to the data sheet.

Applications

In machine and apparatus building the scale division of 0.05 bar allows fine reading over -1 to 0 bar.

Standards and conformity

The data give protection IP 42, a temperature range of -20 to +60 °C and a dial with scales in bar and psi.