3/2-way solenoid valve, spring return (NC), ATEX approval, G 1/8", 230 V AC, 56 l/min, ATEX Ex mb

In cycled systems the nominal size decides how fast a cylinder starts. This 3/2-way solenoid valve works with a nominal size of 1.4 mm at connection G 1/8". It is switched with 230 V AC. The switching function is spring return (NC). The materials are body anodised aluminium and plastic, internal parts stainless steel and brass, seal plastic / NBR.

Advantages

• Control voltage tolerance plus/minus 10 percent, which makes short supply dips uncritical.
• Media oiled and non-oiled, filtered compressed air, so no separate treatment is needed.
• Pressure inlet Port 1 (NO valve: port 3 - armature), which simplifies the piping.
• Flow rate of 56 l/min, so the connected actuator moves without the valve throttling it.
• Switching function spring return (NC), so the rest position is clearly defined.

Applications

• Plants operated within the temperature range -10 to +70 °C.
• Replacement of a defective valve of the same type in existing machines.
• Control of double-acting cylinders with an air demand up to 56 l/min.
• Sequencing of pneumatic axes with connection G 1/8" in handling equipment.

Standards and conformity

The valve carries the ATEX marking II 2G Ex mb IIC T5 IP65 & II 2D Ex mb tb IIIC T95°C IP65 to directive 2014/34/EU.