Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
T reducing supports, for hose I.D. 18/10/18 mm, POM
T reducing supports, for hose I.D. 18/10/18 mm, POM - Riegler 111039
RIEGLER Original product
Net price (excl. VAT)
€3.89 €3.27
Item RGL-111039
Manufacturer no. 35.530
Personal expert advice
Brand new Specialist dealer since 2009 Original product Worldwide shipping
Product data
Manufacturer no.35.530
EAN4047322385367
Country of originGermany
Customs tariff number39174000
ConditionNew
Artikel
RGL-111039
Frequently Bought Together
- This Item: €3.89 €3.27
- Y hose connection supports, for hose I.D. 6 mm, brass - Riegler 134508 €3.47 €2.92
- Y reducing supports - Riegler K1117 As low as €0.99 €0.83Show details
T reducing supports, for hose I.D. 18/10/18 mm, working pressure max. 10 bar, temperature range -40 to 80 °C, POM Lightweight tube connectors distinguished by high strength, toughness, resistance to abrasion and impact resistance.
Technical data
| Min. temperature range | -40 °C |
|---|---|
| Max. temperature range | 80 °C |
| Max. working pressure | 10 bar |
| Material | acetal copolymer (POM) |
| for tube I.D. 1 | 10 mm |
| for tube I.D. 2 | 18 mm |
| L1 | 79.0 mm |
| L2 | 36.0 mm |
Standards and origin
- Customs tariff number: 39174000
- Country of origin: DE
About Tee hose connectors
T-shaped hose connectors are pushed into the hose ends and secured with hose clamps, splitting the line into two outlets. They are the straightforward choice for soft hose runs where a push-in fitting with collet is not needed. The group covers hose inside diameters from 3 to 25 mm at a working pressure up to 10 bar.
What matters when choosing
- For hose I.D.: 3 to 25 mm. The figure has to match the clear bore of the hose, because only then does the connector sit tight and the clamp seal.
- Reduction: besides connectors with three equal ports there are reducing versions with a different branch size, for example 8/6/8 mm or 12/10/12 mm. The features hose I.D. 1 and hose I.D. 2 state the combination.
- Material: acetal copolymer (POM), brass CW617N or a combination of both. POM is light, tough and abrasion resistant, brass takes higher mechanical loads.
- Working pressure: max. 10 bar throughout the group. Where more is required, a screwed fitting takes the place of the hose clamp.
- Temperature: -40 °C to 80 °C is documented for the plastic versions, and part of the range reaches 90 °C medium temperature. That sets the limit for warm circuits.
Typical applications
- Branch points in coolant and lubricant lines on machine tools
- Low pressure air lines in soft hose assembled with hose clamps
- Venting and breather lines on tanks and enclosures
- Test rigs and laboratory setups with frequently changed hose routing
- Maintenance work where an existing hose line is branched afterwards
The 31 items come in acetal copolymer (POM), in brass CW617N and as a combination of both materials. Production is in Germany and China.
| Hersteller-Nr | 35.530 |
|---|---|
| Manufacturer | Riegler |
| Country of Manufacture | Germany |
| EAN | 4047322385367 |
| Weight | 0.012000 |
| Zolltarifnummer | 39174000 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikel-Authentizität | Original product |
| Artikelzustand | New |
| Material | Acetal copolymer (POM) |
| Betriebsdruck max [bar] | 10.000000 |
| For hose ID [mm] | 10 |
| Working pressure max. [bar] | 10 |
| Position sensing | No |
Customers Who Bought This Item Also Bought
Y reducing supports - Riegler K1117
As low as €0.99 €0.83
Double hose connector, reduced - Riegler K1125
As low as €3.99 €3.35
Angled hose fitting supports - Riegler K1121
As low as €2.14 €1.80
Cross push-on connectors - Riegler K1127
As low as €5.59 €4.70