STOP-HN-1812. HANDNOTBETÄTIGUNG M5 FÜR STOP VENTILE 1/8"-1/2"
€12.99
Excl. 19% VAT ,
excl. Shipping Cost
Article
FL-STOP-HN-1812
Manufacturer Nr.
STOP HN 1812
HANDNOTBETÄTIGUNG M5 FÜR STOP VENTILE 1/8"-1/2"
Frequently Bought Together
-
This Item:
€12.99Excl. 19% VAT , excl. Shipping Cost
-
PPL-18. pneumatic sensor fitting G 1/8", Internal thread (pneumatic signal output)
€44.55Excl. 19% VAT , excl. Shipping Cost
-
MHO-2186-230V. Banjo bolt solenoid valve G 1/8"-8x6, 2/2-way (normally open), 230V AC
€47.33Excl. 19% VAT , excl. Shipping Cost
Total price
Materials:
Body: Aluminium anodised and galvanised steel, seals: NBR
Temperature range:
-10°C to +70°C
Operating pressure:
1 to 10 bar
Media:
oiled and unlubricated, filtered compressed air, neutral and non-hazardous gases
Function:
The check valve function can be used for a brief intermediate stop of an actuator. If there is a control signal on the actuating connection, the flow between the banjo and male threads is possible in both directions. If there is no control signal, the valve locks the flow from the male thread to the banjo (venting the actuator), thus causing it to stop briefly. The flow from the banjo to the male threads (towards the actuator) is unaffected by the control signal.
Body: Aluminium anodised and galvanised steel, seals: NBR
Temperature range:
-10°C to +70°C
Operating pressure:
1 to 10 bar
Media:
oiled and unlubricated, filtered compressed air, neutral and non-hazardous gases
Function:
The check valve function can be used for a brief intermediate stop of an actuator. If there is a control signal on the actuating connection, the flow between the banjo and male threads is possible in both directions. If there is no control signal, the valve locks the flow from the male thread to the banjo (venting the actuator), thus causing it to stop briefly. The flow from the banjo to the male threads (towards the actuator) is unaffected by the control signal.
| Manufacturer Nr. | STOP HN 1812 |
|---|---|
| Manufacturer | Fluidics equipment |
| EAN | 4050571648107 |
| Weight | 0.007000 |
| HS-Code | 84812090 |
| Article authenticity | Original product |
| Condition of article | New |
Customers Who Bought This Item Also Bought
MH-318-24V. Banjo bolt solenoid valve G 1/8"-G 1/8", 3/2-way (NC), 24V DC
€35.29
Excl. 19% VAT ,
excl. Shipping Cost
MH-340-115V. Banjo bolt solenoid valve G 1/8"-4, 3/2-way (NC), 115V AC
€35.55
Excl. 19% VAT ,
excl. Shipping Cost
MH-240-12V. Banjo bolt solenoid valve G 1/8"-4, 2/2-way (normally closed), 12V DC
€38.41
Excl. 19% VAT ,
excl. Shipping Cost
MHZ-340-230V. Banjo bolt solenoid valve G 1/8"-4, 3/2-way (NC), 230V AC
€38.06
Excl. 19% VAT ,
excl. Shipping Cost
MHZO-2184-115V. Banjo bolt solenoid valve G 1/8"-6x4, 2/2-way (normally open), 115V AC
€43.63
Excl. 19% VAT ,
excl. Shipping Cost
MH-3186-24VAC. Banjo bolt solenoid valve G 1/8"-8x6, 3/2-way (NC), 24V AC
€35.54
Excl. 19% VAT ,
excl. Shipping Cost