Flat-face male coupling with pressure eliminator, G 1/4", size 1, 500 bar, zinc-plated steel

This male coupling with pressure eliminator joins hydraulic hoses with a G 1/4" female thread in size 1 and still connects when static pressure of up to 500 bar remains on the male side.

Advantages

• The pressure eliminator allows connection while static pressure remains on the male side, for example after sunlight has heated a disconnected component.
• The design is fully compatible with standard flat-face couplings.
• Zinc-plated steel with an NBR seal covers a temperature range of -30 to +100 °C.
• Working pressure of 500 bar at a nominal bore of 6.3 mm in size 1.
• The flat coupling face can be wiped clean before connecting, so no dirt enters the hydraulic system.

Technical data

Applications

The intended use covers hydraulic hose lines that are disconnected and rejoined in service. A working pressure of 500 bar and a temperature range of -30 to +100 °C set the limits.

Standards and compatibility

The version with pressure eliminator is fully compatible with standard flat-face couplings of size 1 with a nominal bore of 6.3 mm.