Enerpac RARH15010, 1489 kN Capacity, 250 mm Stroke, Double-Acting, Aluminum Hollow Plunger Hydraulic Cylinder
€14,422.08
Excl. 19% VAT ,
excl. Shipping Cost
Article
ENP-RARH15010
Manufacturer Nr.
RARH15010
RARH15010, 1489 kN Capacity, 250 mm Stroke, Double-Acting, Aluminum Hollow Plunger Hydraulic Cylinder
Frequently Bought Together
-
This Item:
€14,422.08Excl. 19% VAT , excl. Shipping Cost
-
Enerpac RC254, 232 kN Capacity, 102 mm Stroke, General Purpose Hydraulic Cylinder
€795.14Excl. 19% VAT , excl. Shipping Cost
-
Enerpac BLS2006, 1995 kN Capacity, 151 mm Stroke, Climbing Jack
€0.00Excl. 19% VAT , excl. Shipping Cost
Total price
Model: RARH15010 |ECCN: EAR99 | Harmonization: 8412210075
Series: RARH |Product Line: Industrial Tools
Series: RARH |Product Line: Industrial Tools
- Lighter and shorter collapsed height than equivalent RACH models
- Double-acting for rapid retraction, regardless of hose lengths or system losses
- Built-in safety valve prevents accidental over-pressurization
- Hollow plunger design allows for both pull and push forces
- Hard coat finish on all surfaces resists damage and extends cylinder life
- Handles and CR-400 couplers with dust caps included on all models
- Floating center tube increases seal life
- Steel baseplate and saddle for protection against load-induced damage
- Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
- All cylinders meet ASME B-30.1 standards
Dimension imperial
Collapsed Height A (in)
18.27
Extended Height B (in)
28.11
Outside Diameter D (in)
11.02
Cylinder Bore Diameter E (in)
7.48
Plunger Diameter F (in)
5.91
Base to Advance Port H (in)
2.41
Saddle Diameter J1 (in)
5.00
Saddle Protrusion from Plunger K (in)
0.74
Plunger Internal Thread O (in)
4 1/4"-12 UN
Plunger Thread Length P (in)
1.57
Base Mounting Holes Bolt Circle U (in)
9.84
Base Mounting Holes Thread V
M10
Center Hole Diameter Y (in)
3.11
Base Mounting Holes Thread Depth Z (in)
0.47
Dimension metric
Collapsed Height A (mm)
464
Extended Height B (mm)
714
Outside Diameter D (mm)
280
Cylinder Bore Diameter E (mm)
190
Plunger Diameter F (mm)
150
Base to Advance Port H (mm)
61
Saddle Diameter J (mm)
127
Plunger Internal Thread O (in)
4 1/4"-12 UN
Plunger Thread Length P (mm)
40
Base Mounting Holes Bolt Circle U (mm)
250
Base Mounting Holes Thread V
M10
Center Hole Diameter Y (mm)
79
Base Mounting Holes Thread Depth Z (mm)
12
| Manufacturer Nr. | RARH15010 |
|---|---|
| Manufacturer | Enerpac |
| Weight | 70.000000 |
| Note | Industriewerkzeuge |
| Article authenticity | Original product |
| Condition of article | New |
Download
Customers Who Bought This Item Also Bought
Enerpac RR50024, 5108 kN Capacity, 609 mm Stroke, Double-Acting, General Purpose Hydraulic Cylinder
€0.00
Excl. 19% VAT ,
excl. Shipping Cost
Enerpac RC1012, 101 kN Capacity, 304 mm Stroke, General Purpose Hydraulic Cylinder
€740.36
Excl. 19% VAT ,
excl. Shipping Cost
Enerpac HCG4006, 4008 kN Capacity, 150 mm Stroke, Single-Acting, High Tonnage Hydraulic Cylinder
€0.00
Excl. 19% VAT ,
excl. Shipping Cost
Enerpac RCH606, 576 kN Capacity, 153 mm Stroke, Single-Acting, Hollow Plunger Hydraulic Cylinder
€2,753.11
Excl. 19% VAT ,
excl. Shipping Cost
Enerpac CUSP750, 7527 kN Capacity, 10 mm Stroke, High Tonnage Ultra Flat Hydraulic Cylinder
€0.00
Excl. 19% VAT ,
excl. Shipping Cost
