K-31806. Tilt lever valve 3/2-way (NC), G 1/8"-6 mm
€20.78
Excl. 19% VAT ,
excl. Shipping Cost
Article
FL-K-31806
Manufacturer Nr.
K 31806
Tilt lever valve 3/2-way (NC), G 1/8"-6 mm
Frequently Bought Together
-
This Item:
€20.78Excl. 19% VAT , excl. Shipping Cost
-
STOP-14. Pilot operated check valve without manual emergency operation, G 1/4" (female thread / male thread)
€31.55Excl. 19% VAT , excl. Shipping Cost
-
MH-3186-115V. Banjo bolt solenoid valve G 1/8"-8x6, 3/2-way (NC), 115V AC
€35.54Excl. 19% VAT , excl. Shipping Cost
Total price
Materials:
Body: Nickel-plated brass, internal parts: brass / stainless steel, seal: NBR
Temperature range:
-5°C to +70°C
Operating pressure:
0 - 8 bar (banjo valve 2/2-way and 3/2-way with pressure inlet ring piece: 0 - 10 bar)
Media:
lubricated and unlubricated, filtered compressed air, neutral gases
Advantages:
•low price,
•extensive application options,
•simple and fast setting up of a circuit,
•rocker lever can be positioned
Application:
To actuate single-acting cylinders, screw the 3/2-way valve (K 3...) directly in the cylinder.
Required mounting hole for panel mounting:
Ø 12.5 mm, maximum sheet thickness: 4 mm (bulkhead thread: M 12x1, tie-rod valve 2/2-way and 3/2-way with pressure inlet ring piece: M 12x0.75)
Body: Nickel-plated brass, internal parts: brass / stainless steel, seal: NBR
Temperature range:
-5°C to +70°C
Operating pressure:
0 - 8 bar (banjo valve 2/2-way and 3/2-way with pressure inlet ring piece: 0 - 10 bar)
Media:
lubricated and unlubricated, filtered compressed air, neutral gases
Advantages:
•low price,
•extensive application options,
•simple and fast setting up of a circuit,
•rocker lever can be positioned
Application:
To actuate single-acting cylinders, screw the 3/2-way valve (K 3...) directly in the cylinder.
Required mounting hole for panel mounting:
Ø 12.5 mm, maximum sheet thickness: 4 mm (bulkhead thread: M 12x1, tie-rod valve 2/2-way and 3/2-way with pressure inlet ring piece: M 12x0.75)
| Manufacturer Nr. | K 31806 |
|---|---|
| Manufacturer | Fluidics equipment |
| EAN | 4050571391942 |
| Weight | 0.040000 |
| HS-Code | 84812090 |
| Article authenticity | Original product |
| Condition of article | New |
Customers Who Bought This Item Also Bought
MHZO-3186-115V. Banjo bolt solenoid valve G 1/8"-8x6, 3/2-way (NO), 115V AC
€46.33
Excl. 19% VAT ,
excl. Shipping Cost
MHZ-3186-230V. Banjo bolt solenoid valve G 1/8"-8x6, 3/2-way (NC), 230V AC
€37.94
Excl. 19% VAT ,
excl. Shipping Cost
MHZ-2186-24VAC. Banjo bolt solenoid valve G 1/8"-8x6, 2/2-way (normally closed), 24V AC
€35.56
Excl. 19% VAT ,
excl. Shipping Cost
MH-340-115V. Banjo bolt solenoid valve G 1/8"-4, 3/2-way (NC), 115V AC
€35.55
Excl. 19% VAT ,
excl. Shipping Cost
MH-340-12V. Banjo bolt solenoid valve G 1/8"-4, 3/2-way (NC), 12V DC
€35.55
Excl. 19% VAT ,
excl. Shipping Cost