€2,542.51
Excl. 19% VAT ,
excl. Shipping Cost
Article
FES-8005056
Manufacturer Nr.
DAPS-0480-090-RS4-F1012-MW
Semi-rotary drive
Frequently Bought Together
-
This Item:
€2,542.51Excl. 19% VAT , excl. Shipping Cost
-
Festo 8048145. Semi-rotary drive DFPD-160-RP-90-RS30-F0710-R3-EP
€365.83Excl. 19% VAT , excl. Shipping Cost
-
Festo 552891. Semi-rotary drive DAPS-0240-090-RS1-F0710-CR
€3,157.33Excl. 19% VAT , excl. Shipping Cost
Total price
Size of valve actuator | 0480 |
Flange hole pattern | F10 F12 |
Swivel angle | 92 deg |
Shaft connection depth | 38.5 mm |
Note on end-position adjusting range | One end position optionally adjustable |
Fitting connection conforms to standard | ISO 5211 |
Cushioning | No cushioning |
Mounting position | optional |
Mode of operation | Single-acting |
Design | Scotch yoke system |
Position detection | Without |
Closing direction | Closes to the right |
Symbol | 00991266 |
Valve connection conforms to standard | VDI/VDE 3845 (NAMUR) |
Safety Integrity Level (SIL) | Up to SIL 2 High Demand mode To SIL 2 Low Demand mode |
Supply pressure for spring strength | 0.56 MPa |
Supply pressure for spring strength | 5.6 bar |
Operating pressure | 0.56 MPa ... 0.84 MPa |
Operating pressure | 5.6 bar ... 8.4 bar |
Nominal operating pressure | 0.56 MPa |
Nominal operating pressure | 5.6 bar |
CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) |
CE marking (see declaration of conformity) | To UK EX instructions |
Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) |
Certificate issuing authority | German Technical Control Board North (TÜV Nord) 212170801 |
ATEX category gas | II 2G |
ATEX category dust | II 2D |
Explosion ignition protection type for gas | Ex h IIC T6...T3 Gb X |
Explosion ignition protection type for dust | Ex h IIIC T85°C...T200°C Db X |
Explosion ambient temperature | -50°C |
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
Corrosion resistance class CRC | 2 - Moderate corrosion stress |
LABS (PWIS) conformity | VDMA24364-B1/B2-L |
Ambient temperature | -20 °C ... 80 °C |
Torque at nominal operating pressure and 0° swivel angle | 480 Nm |
Torque at nominal operating pressure and 50° swivel angle | 240 Nm |
Torque at nominal operating pressure and 90° swivel angle | 320 Nm |
Spring return torque at 0° swivel angle | 320 Nm |
Spring return torque at 50° swivel angle | 240 Nm |
Spring return torque at 90° swivel angle | 480 Nm |
Spring strength | 4 |
Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0° | 19.6 l |
Product weight | 28100 g |
Shaft connection | T36 |
Pneumatic connection | G1/4 |
Note on materials | RoHS-compliant |
Material cover | Wrought aluminium alloy |
Material seals | FPM NBR PUR |
Material housing | Wrought aluminium alloy |
Material screws | High-alloy steel |
Material shaft | High-alloy steel |
Material number shaft | 1.4305 |
Manufacturer Nr. | DAPS-0480-090-RS4-F1012-MW |
---|---|
Manufacturer | Festo |
EAN | 4052568257057 |
Weight | 0.100000 |
HS-Code | 84123900 |
Customers Who Bought This Item Also Bought