2/2-way solenoid valve G 1-1/4" closed (NC) without power,NBR
-
This Item:
€300.61Excl. 19% VAT , excl. Shipping Cost
-
M-2380-115V. 2/2-way brass solenoid valve G 3/8", -0,95 to 16 bar, closed (NC) without power
€130.28Excl. 19% VAT , excl. Shipping Cost
-
M-2340-230V. 2/2-way brass solenoid valve G 3/4", -0,95 to 16 bar, closed (NC) without power
€148.00Excl. 19% VAT , excl. Shipping Cost
Materials:
Body: brass, internal parts: brass / stainless steel, seal: NBR (types G 1/8" & G 1/4": FKM)
Temperature range:
-10°C to max. +85°C (types G 1/8" and G 1/4": -10°C to max. +130°C), environment: max. +50°C
Media:
Compressed air, neutral gases, water, neutral low-viscosity media, heating oil, other media on request
Installation position:
With upright magnets
Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages
Voltage tolerance:
± 10 %
Protection class:
IP 65 (plug size 3)
Optional:
FKM seal (-10°C to max. +130°C) -V, EPDM seal for air and warm water (-10°C to max. +120°C) -EP
Information:
These valves are always supplied with a solenoid coil and a connector plug.
Warning:
For opening or closing, servo-controlled valves require a pressure difference between the valve inlet and valve outlet. The pressure difference is given as minimum pressure. There is a pressure compensation in the valve, resulting that no or little medium is used at the valve outlet, the valve will no longer function (it opens or closes unreliably).
Manufacturer Nr. | M 2114 230V |
---|---|
Manufacturer | Fluidics equipment |
EAN | 4050571473846 |
Weight | 3.000000 |
HS-Code | 84812090 |