€0.00
Excl. 19% VAT ,
excl. Shipping Cost
Article
ENP-HCR5008
Manufacturer Nr.
HCR5008
HCR5008, 5114 kN Capacity, 200 mm Stroke, Double-Acting, High Tonnage Hydraulic Cylinder
Frequently Bought Together
-
This Item:
€0.00Excl. 19% VAT , excl. Shipping Cost
-
Enerpac RACH15010, 1588 kN Capacity, 250 mm Stroke, Aluminum Hollow Plunger Hydraulic Cylinder
€12,129.62Excl. 19% VAT , excl. Shipping Cost
-
Enerpac RC158, 142 kN Capacity, 203 mm Stroke, General Purpose Hydraulic Cylinder
€809.25Excl. 19% VAT , excl. Shipping Cost
Total price
Model: HCR5008 |ECCN: EAR99 | Harmonization: 8412210075
Series: HCR |Product Line: Industrial Tools
- Fast advance and retract
- 10% side-load resistance over full stroke
- Hardened surface resists side-loading and cyclic wear
- Weather protected, inside and out
- Upper and lower replaceable bearings enclose the cylinder plunger for support throughout the stroke
- Certified lifting eyes, base mounting holes, and optional collar threads
- Collar thread is optional on 300 ton models and higher
- For collar thread on cylinder add suffix "E002" to the end of the model number
- The collar thread length is designed for full rated capacity
- Thread Size (W): M400 x 4
- Thread Length (X): 90 mm (3.54 in)
Dimension imperial
Collapsed Height A (in)
19.45
Collapsed Height With Optional Tilt Saddle A1 (in)
21.34
Optional Tilt Saddle Addition To Collapsed Height A1 (in)
1.89
Optional Tilt Saddle Diameter J1 (in)
9.06
Extended Height B (in)
27.32
Outside Diameter D (in)
15.75
Cylinder Bore Diameter E (in)
12.01
Plunger Diameter F (in)
9.84
Base to Advance Port H (in)
3.11
Top to Retract Port (in)
4.76
Saddle Diameter J1 (in)
7.05
Saddle Protrusion from Plunger K (in)
0.16
Saddle Maximum Tilt Angle Radius (degrees)
5
Base Mounting Holes Thread V
M24 x 3
Dimension metric
Collapsed Height A (mm)
494
Collapsed Height With Optional Tilt Saddle A1 (mm)
542
Optional Tilt Saddle Addition To Collapsed Height A1 (mm)
48
Extended Height B (mm)
694
Outside Diameter D (mm)
400
Cylinder Bore Diameter E (mm)
305
Plunger Diameter F (mm)
250
Base to Advance Port H (mm)
79
Top To Retract Port I (mm)
121
Saddle Diameter J (mm)
179
Saddle Protrusion from Plunger K1 (mm)
4
Saddle Maximum Tilt Angle Radius (degrees)
5
Base Mounting Holes Bolt Circle U (mm)
340
Base Mounting Holes Thread V
M24 x 3
Base Mounting Holes Thread Depth Z (mm)
36
Manufacturer Nr. | HCR5008 |
---|---|
Manufacturer | Enerpac |
Weight | 443.000000 |
Note | Industriewerkzeuge |
Customers Who Bought This Item Also Bought