€0.00
Excl. 19% VAT ,
excl. Shipping Cost
Article
ENP-HCG50010
Manufacturer Nr.
HCG50010
HCG50010, 5114 kN Capacity, 250 mm Stroke, Single-Acting, High Tonnage Hydraulic Cylinder
Frequently Bought Together
-
This Item:
€0.00Excl. 19% VAT , excl. Shipping Cost
-
Enerpac RCS201, 201 kN Capacity, 45 mm Stroke, Low Height Hydraulic Cylinder
€527.88Excl. 19% VAT , excl. Shipping Cost
-
Enerpac RAC308, 309 kN Capacity, 200 mm Stroke, Aluminum Hydraulic Cylinder
€1,909.83Excl. 19% VAT , excl. Shipping Cost
Total price
Model: HCG50010 |ECCN: EAR99 | Harmonization: 8412210075
Series: HCG |Product Line: Industrial Tools
- Hardened surface resists side-loading and cyclic wear
- 10% side-load resistance over full stroke
- Stop-ring to prevent plunger blow-out
- Weather protected, inside and out
- Upper and lower replaceable bearings enclose the cylinder plunger for support throughout the stroke
- Certified lifting eyes, base mounting holes, and optional collar threads
- Collar thread is optional on 300 ton models and higher
- For collar thread on cylinder add suffix "E002" to the end of the model number
- The collar thread length is designed for full rated capacity
- Thread Size (W): M400 x 4
- Thread Length (X): 90 mm (3.54 in)
Dimension imperial
Collapsed Height A (in)
21.42
Collapsed Height With Optional Tilt Saddle A1 (in)
23.31
Optional Tilt Saddle Addition To Collapsed Height A1 (in)
1.89
Optional Tilt Saddle Diameter J1 (in)
9.06
Extended Height B (in)
31.26
Outside Diameter D (in)
15.75
Cylinder Bore Diameter E (in)
12.01
Plunger Diameter F (in)
9.84
Base to Advance Port H (in)
3.11
Saddle Diameter J1 (in)
7.05
Saddle Protrusion from Plunger K (in)
0.16
Saddle Maximum Tilt Angle Radius (degrees)
5
Base Mounting Holes Thread V
M24 x 3
Dimension metric
Collapsed Height A (mm)
544
Collapsed Height With Optional Tilt Saddle A1 (mm)
592
Optional Tilt Saddle Addition To Collapsed Height A1 (mm)
48
Extended Height B (mm)
794
Outside Diameter D (mm)
400
Cylinder Bore Diameter E (mm)
305
Plunger Diameter F (mm)
250
Base to Advance Port H (mm)
79
Saddle Diameter J (mm)
179
Saddle Protrusion from Plunger K1 (mm)
4
Saddle Maximum Tilt Angle Radius (degrees)
5
Base Mounting Holes Bolt Circle U (mm)
340
Base Mounting Holes Thread V
M24 x 3
Base Mounting Holes Thread Depth Z (mm)
36
Manufacturer Nr. | HCG50010 |
---|---|
Manufacturer | Enerpac |
Weight | 479.000000 |
Note | Industriewerkzeuge |
Customers Who Bought This Item Also Bought