Festo DSMI-40-270-A-B (561691) Semi-Rotary Drive
€1,189.79
Excl. 19% VAT ,
excl. Shipping Cost
Article
FES-561691
Manufacturer Nr.
DSMI-40-270-A-B
Semi-Rotary Drive
Frequently Bought Together
-
This Item:
€1,189.79Excl. 19% VAT , excl. Shipping Cost
-
Festo 178306. Displacement encoder MME-MTS-500-TLF-AIF
€1,495.63Excl. 19% VAT , excl. Shipping Cost
-
Festo 178310. Displacement encoder MME-MTS-225-TLF-AIF
€1,358.08Excl. 19% VAT , excl. Shipping Cost
Total price
| Settings range swivel angle [deg] | 0 to 270 |
| Stroke reduction at the end positions | 5 ° |
| Smallest positioning stroke | 15° for soft stop 5° during positioning |
| Piston diameter | 40 mm |
| Swivel angle [deg] | 0 to 272 |
| Dampening | P: Elastic silencer rings / plates double-sided |
| Position the integration location | arbitrary |
| Integration position soft stop | horizontal |
| Measurement principle travel measurement system | Analogue |
| Construction set up | Drive shaft ball bearing mounted Rotary vane |
| Position detection | With Angle measurement system integrated For proximity switch |
| Operating pressure positioning / soft stop [bar] | 4 to 8 |
| Max. swivel frequency at 6 bar [Hz] | 2 |
| Max. movement speed [deg/s] | 2.000 |
| Min. movement speed [deg/s] | 50 |
| Typical positioning time short stroke, horizontal | 0,25/0,25 s |
| Typical positioning time long stroke, horizontal | 0,30/0,55 s |
| Connection resistance [kOhm] | 5 |
| Recommended grinder current [µA] | < 1 µA |
| Principle of operation | double acting |
| Max. operating voltage DC [V] | 42 |
| Max. grinder current short term [µA] | 10.000 |
| Max. power input [mA] | 4 |
| Nominal operating voltage DC [V] | 10 |
| Tolerance connection resistance [%] | 20 |
| Permitted voltage oscillations | < 1 % |
| CE certificate (see declaration of conformity) | to EU EMC directive |
| Operating medium | Compressed air to ISO 8573-1:2010 [6:4:4] |
| Information about operating and control medium | Oiled operation not possible |
| Continuous impact strength DIN&EC 68 parts 2-82 | Tested to severity class 2 |
| Corrosion resistant class KBK | 0 - No corrosion stressing |
| Protection category | IP65 acc. to IEC 60529 |
| Oscillation strength to DIN/IEC 68 part 2-6 | Tested to severity class 2 |
| ambient temperature [°C] | -10 to 60 |
| Impact energy at the end positions [J] | 0,10 |
| Max. axial force [N] | 120 |
| Max. mass inertia, horizontal [kg/m²] | 0,12 |
| Max. mass inertia, vertical [kg/m²] | 0,12 |
| Max. radial force [N] | 350 |
| Min. mass moment of inertia, horizontal [kg/m²] | 0,0060 |
| Min. mass moment of inertia, vertical [kg/m²] | 0,0060 |
| Theoretical torque at 6 bar [Nm] | 20 |
| Product weight [g] | 3.950 |
| Resolution angle [deg] | <= 0,1 deg |
| output signal | Analogue |
| Independent linearity | 0,0025 |
| Repeatability positioning | ± 0,3 deg |
| Repeatability soft stop end position | < 0.2 deg |
| Repeatability soft stop intermediate position | ± 2 deg |
| Electrical connection: path measurement system | 4 pin |
| Cable length [MTR] | 30 |
| Fastening type | with female thread |
| Pneumatic connection | G1/8 |
| Housing measurement system material | Aluminium wrought alloy anodized |
| Material information | Copper and PTFE-free |
| Stopper lever material | Aluminium wrought alloy anodized |
| Drive shaft material | Nickel- plated steel |
| Fixed limit stop material | Steel |
| Housing material | Aluminium wrought alloy anodized |
| Measurement system coupling material | TPE-U(PU) |
| Feather key material | Steel |
| Rotary vane material | PET reinforced |
| Plug housing material | PA reinforced |
| Cylinder tube material | Aluminium wrought alloy |
| Manufacturer Nr. | DSMI-40-270-A-B |
|---|---|
| Manufacturer | Festo |
| GPSR manufacturer information | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| EAN | 4052568208868 |
| Weight | 4.100000 |
| HS-Code | 84123900 |
| Article authenticity | Original product |
| Condition of article | New |
Download
Customers Who Bought This Item Also Bought
