Festo 4080496. bus module CPX-E-PB
€369.89
Excl. 19% VAT ,
excl. Shipping Cost
Article
FES-4080496
Manufacturer Nr.
CPX-E-PB
bus module
Frequently Bought Together
-
This Item:
€369.89Excl. 19% VAT , excl. Shipping Cost
-
Festo 565708. Insulating plate CPX-P-AB-IP
€19.70Excl. 19% VAT , excl. Shipping Cost
-
Festo 4252744. Controller CPX-E-CEC-M1-EP
€1,656.52Excl. 19% VAT , excl. Shipping Cost
Total price
| Dimensions (W x L x H) | 42.2 x 125.8 x 76.5 mm |
| Grid dimension | 18.9 mm |
| Type of mounting | With H-rail |
| Max. number of modules | 10 |
| Product weight | 145 g |
| Mounting position | Vertical Horizontal |
| Ambient temperature | -5 °C ... 50 °C |
| Note on ambient temperature | -5 - 60°C for vertical installation |
| Storage temperature | -20 °C ... 70 °C |
| Relative air humidity | 95 % Non-condensing |
| Degree of protection | IP20 |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 |
| Protection against direct and indirect contact | PELV |
| LABS (PWIS) conformity | VDMA24364 zone III |
| CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive |
| CE marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions |
| KC mark | KC-EMV |
| Approval | RCM trademark c UL us listed (OL) |
| Certificate issuing authority | UL E239998 |
| Note on materials | RoHS-compliant |
| Material housing | PA |
| Material screws | Galvanised steel |
| Diagnostics via LED | Bus fault Force mode Power supply, electronics/sensors Load power supply System fault |
| Diagnostics via bus | Wire break Short circuit Parameterisation error Overflow buffer Upper limit value violated Transmission error Lower limit value not observed Undervoltage Watchdog/I/O status Requested function not supported Not ready for data exchange |
| Operator controls | DIL switch |
| Fieldbus interface | PROFIBUS |
| Field bus, protocol | PROFIBUS DP |
| Fieldbus interface, function | Bus connection incoming/outgoing |
| Field bus, connection type | Socket |
| Field bus, connection system | Sub-D |
| Fieldbus interface, connection pattern | 00995638 |
| Field bus, connection pattern | 9 |
| Field bus interface, electrical isolation | yes |
| Field bus interface, transmission rate | 1.5 Mbps 12 Mbit/s 187.5 kbit/s 19.2 kbit/s 3 Mbit/s 500 kbit/s 6 Mbit/s 9.6 kbit/s 93.75 kbit/s |
| Service interface, function | Diagnostics and parameterisation |
| Service interface, connection type | Socket |
| Service interface, connection technology | USB 2.0 type B mini |
| Service interface, number of pins/wires | 5 |
| Service interface, connection pattern | 00995868 |
| Max. address volume, inputs | 64 Byte |
| Fieldbus interface, max. address volume for inputs | 64 Byte |
| Note on inputs | 62 bytes with I/O diagnostic interface 63 bytes with status bits 64 bytes without diagnostics |
| Max. address volume, outputs | 64 Byte |
| Fieldbus interface, max. address volume for outputs | 64 Byte |
| Note on outputs | 62 bytes with I/O diagnostic interface 64 bytes with status bits 64 bytes without diagnostics |
| System parameters | Diagnostic memory Fail-safe response Force mode System start |
| Module parameters | Undervoltage diagnostics Process value representation of analogue modules |
| Configuration support | GSD file |
| Power supply, function | Electronics and sensors |
| Power supply, connection type | Terminal strip |
| power supply, connection system | Spring-loaded terminal |
| Power supply, connection pattern | 00995847 |
| Power supply, number of pins/wires | 4 |
| Nominal DC operating voltage, electronics/sensors | 24 V |
| Permissible voltage fluctuations for electronics/sensors | ± 25% |
| Power supply, conductor diameter | 0.2 mm² ... 1.5 mm² |
| Power supply, note on conductor diameter | 0.2 - 2.5 mm² for flexible conductors without wire end sleeves |
| Max. power supply | 8 A |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 75 mA |
| Power failure bridging | 20 ms |
| Reverse polarity protection | 24 V sensor supply against 0 V sensor supply |
| Manufacturer Nr. | CPX-E-PB |
|---|---|
| Manufacturer | Festo |
| GPSR manufacturer information | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| EAN | 4052568291167 |
| Weight | 0.220000 |
| HS-Code | 85176200 |
| Article authenticity | Original product |
| Condition of article | New |
Download
Customers Who Bought This Item Also Bought
