Festo 4080494. analogue output module CPX-E-4AO-U-I
€330.25
Excl. 19% VAT ,
excl. Shipping Cost
Article
FES-4080494
Manufacturer Nr.
CPX-E-4AO-U-I
analogue output module
Frequently Bought Together
-
This Item:
€330.25Excl. 19% VAT , excl. Shipping Cost
-
Festo CDPX-X-A-W-7 (574411) Operator Unit
€1,381.04Excl. 19% VAT , excl. Shipping Cost
-
Festo 4827505. counter module CPX-E-1CI
€256.28Excl. 19% VAT , excl. Shipping Cost
Total price
| Dimensions (W x L x H) | 18.9 x 76.6 x 124.3 mm |
| Grid dimension | 18.9 mm |
| Type of mounting | With H-rail |
| Product weight | 96 g |
| Mounting position | Vertical Horizontal |
| Ambient temperature | -5 °C ... 50 °C |
| Note on ambient temperature | -5 - 60°C for vertical installation |
| Storage temperature | -20 °C ... 70 °C |
| Relative air humidity | 95 % Non-condensing |
| Degree of protection | IP20 |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 |
| Protection against direct and indirect contact | PELV |
| Max. cable length | 30 m outputs Shielded |
| LABS (PWIS) conformity | VDMA24364 zone III |
| CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive |
| CE marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions |
| KC mark | KC-EMV |
| Approval | RCM trademark c UL us listed (OL) |
| Certificate issuing authority | UL E239998 |
| Note on materials | RoHS-compliant |
| Material housing | PA |
| Material screws | Galvanised steel |
| Diagnostics via LED | Errors per channel Errors per module |
| Diagnostics via bus | Short circuit/overload in actuator supply Short circuit/overload at analogue output Parameterisation error Nominal range exceeded Nominal range not reached Undervoltage in load supply General errors |
| Max. address volume, outputs | 8 Byte |
| Number of outputs | 4 |
| Module parameters | Deactivate actuator supply Data format for analogue outputs Short circuit diagnostics for actuator supply Parameterisation error diagnostics Diagnostics for undervoltage in load supply Behaviour after short circuit/overload in actuator supply Behaviour after short circuit/overload at analogue output |
| Channel parameters | Force channel x Enable wire break/idling diagnostics Enable for parameterisation error diagnostics Enable overload/short circuit diagnostics Signal range per channel |
| Power supply, connection type | Terminal strip |
| power supply, connection system | Spring-loaded terminal |
| Power supply, connection pattern | 00995847 |
| Power supply, number of pins/wires | 4 |
| Nominal operating voltage DC of load | 24 V |
| Permissible voltage fluctuation of load | ± 25 % |
| Nominal DC operating voltage, electronics/sensors | 24 V |
| Permissible voltage fluctuations for electronics/sensors | ± 25% |
| Power supply, conductor diameter | 0.2 mm² ... 1.5 mm² |
| Power supply, note on conductor diameter | 0.2 - 2.5 mm² for flexible conductors without wire end sleeves |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 60 mA |
| Intrinsic current consumption at nominal operating voltage load | Typically 15 mA |
| Power failure bridging | 10 ms |
| Reverse polarity protection | 24 V actuator supply against 0 V sensor supply 24 V load against 0 V load 24 V sensor supply against 0 V sensor supply |
| Behaviour after end of overload of the sensor supply | Automatic return (default) Parameterisable (module by module) |
| Electrical connection output, function | Analogue output |
| Electrical connection output, connection type | 4x terminal strip |
| Electrical connection output, connector system | Spring-loaded terminal |
| Electrical connection output, number of connections/cores | 4 |
| Electrical connection output, connection pattern | 00995841 |
| Electrical connection for output, conductor cross section | 0.2 mm² ... 1.5 mm² |
| Electrical connection for output, note on conductor cross section | 0.2 - 2.5 mm² for flexible conductors without wire end sleeves |
| Electrical connection for output 2, function | Functional earth |
| Electrical connection for output 2, connection type | Terminal strip |
| Electrical connection for output 2, connection technology | Spring-loaded terminal |
| Electrical connection output 2, number of pins/wires | 4 |
| Electrical connection output 2, connection pattern | 00995842 |
| Electrical connection output 2, conductor cross section | 0.2 mm² ... 1.5 mm² |
| Electrical connection output 2, note on conductor cross section | 0.2 - 2.5 mm² for flexible conductors without wire end sleeves |
| Max. residual current outputs per module | 2 A |
| Measured variable | Voltage Current |
| Data format | 15 bits + prefix Linear scaling |
| analog input | -10 - 10 V -20 - 20 mA -5 - 5 V 0 - 10 V 0 - 20 mA 4 - 20 mA |
| Repetition accuracy | ±0.05% at 25°C |
| Basic error limit at 25 °C | ±0.1% |
| Operating error limit related to the ambient temperature range | ±0.3% |
| Isolation channel - channel | no |
| Isolation channel - internal bus | yes |
| Fuse protection (short circuit) | Internal electronic fuse per module |
| Manufacturer Nr. | CPX-E-4AO-U-I |
|---|---|
| Manufacturer | Festo |
| GPSR manufacturer information | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| EAN | 4052568291143 |
| Weight | 0.120000 |
| HS-Code | 85389099 |
| Article authenticity | Original product |
| Condition of article | New |
Download
Customers Who Bought This Item Also Bought
