Enerpac RARH606, 595 kN Capacity, 150 mm Stroke, Double-Acting, Aluminum Hollow Plunger Hydraulic Cylinder
€4,561.68
Excl. 19% VAT ,
excl. Shipping Cost
Article
ENP-RARH606
Manufacturer Nr.
RARH606
RARH606, 595 kN Capacity, 150 mm Stroke, Double-Acting, Aluminum Hollow Plunger Hydraulic Cylinder
Frequently Bought Together
-
This Item:
€4,561.68Excl. 19% VAT , excl. Shipping Cost
-
Enerpac RACH604, 596 kN Capacity, 100 mm Stroke, Aluminum Hollow Plunger Hydraulic Cylinder
€3,643.70Excl. 19% VAT , excl. Shipping Cost
-
Enerpac BLS2006, 1995 kN Capacity, 151 mm Stroke, Climbing Jack
€0.00Excl. 19% VAT , excl. Shipping Cost
Total price
Model: RARH606 |ECCN: EAR99 | Harmonization: 8412210075
Series: RARH |Product Line: Industrial Tools
Series: RARH |Product Line: Industrial Tools
- Lighter and shorter collapsed height than equivalent RACH single-acting models
- Double-acting for rapid retraction, regardless of hose lengths or system losses
- Built-in safety valve prevents accidental overpressurization
- Hollow plunger design allows for both pull and push forces
- Composite bearings increase cylinder life and side load resistance
- Hard coat finish on all surfaces resists damage and extends cylinder life
- Handles included on all models
- Floating center tube increases seal life
- Steel baseplate and saddle for protection against load-induced damage
- Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
- CR400 coupler and dust cap included on all models
- All cylinders meet ASME B-30.1 standards
Dimension imperial
Collapsed Height A (in)
13.62
Extended Height B (in)
19.52
Outside Diameter D (in)
7.09
Cylinder Bore Diameter E (in)
5.12
Plunger Diameter F (in)
4.33
Base to Advance Port H (in)
1.88
Saddle Diameter J1 (in)
3.61
Saddle Protrusion from Plunger K (in)
0.5
Plunger Internal Thread O (in)
2 3/4"-16 UN
Plunger Thread Length P (in)
0.79
Base Mounting Holes Bolt Circle U (in)
6.3
Base Mounting Holes Thread V
M6
Center Hole Diameter Y (in)
2.13
Base Mounting Holes Thread Depth Z (in)
0.47
Dimension metric
Collapsed Height A (mm)
346
Extended Height B (mm)
496
Outside Diameter D (mm)
180
Cylinder Bore Diameter E (mm)
130
Plunger Diameter F (mm)
110
Base to Advance Port H (mm)
48
Saddle Diameter J (mm)
92
Plunger Internal Thread O (in)
2 3/4"-16 UN
Plunger Thread Length P (mm)
20
Base Mounting Holes Bolt Circle U (mm)
160
Base Mounting Holes Thread V
M6
Center Hole Diameter Y (mm)
54
Base Mounting Holes Thread Depth Z (mm)
12
| Manufacturer Nr. | RARH606 |
|---|---|
| Manufacturer | Enerpac |
| Weight | 22.200000 |
| Note | Industriewerkzeuge |
| Article authenticity | Original product |
| Condition of article | New |
Download
Customers Who Bought This Item Also Bought
Enerpac BRC106, 105 kN Capacity, 151 mm Stroke, Pull Hydraulic Cylinder
€1,334.64
Excl. 19% VAT ,
excl. Shipping Cost
Enerpac RR50012, 5108 kN Capacity, 305 mm Stroke, Double-Acting, General Purpose Hydraulic Cylinder
€0.00
Excl. 19% VAT ,
excl. Shipping Cost
Enerpac HCG8006, 8149 kN Capacity, 150 mm Stroke, Single-Acting, High Tonnage Hydraulic Cylinder
€0.00
Excl. 19% VAT ,
excl. Shipping Cost
Enerpac RACH308, 358 kN Capacity, 200 mm Stroke, Aluminum Hollow Plunger Hydraulic Cylinder
€3,263.56
Excl. 19% VAT ,
excl. Shipping Cost
Enerpac HCRL10010, 990 kN Capacity, 250 mm Stroke, Double-Acting, High Tonnage, Lock Nut Hydraulic Cylinder
€5,485.47
Excl. 19% VAT ,
excl. Shipping Cost
Enerpac HCL502, 550 kN Capacity, 50 mm Stroke, Single-Acting, High Tonnage, Lock Nut Hydraulic Cylinder
€1,150.38
Excl. 19% VAT ,
excl. Shipping Cost
Enerpac HCR2002, 1985 kN Capacity, 50 mm Stroke, Double-Acting, High Tonnage Hydraulic Cylinder
€0.00
Excl. 19% VAT ,
excl. Shipping Cost
Enerpac HCG3002, 3036 kN Capacity, 50 mm Stroke, Single-Acting, High Tonnage Hydraulic Cylinder
€0.00
Excl. 19% VAT ,
excl. Shipping Cost