Festo SFAW-32-S13-E-PNLK-PNVBA-M12 (8036879) Flow Sensor
€331.34
Excl. 19% VAT ,
excl. Shipping Cost
Article
FES-8036879
Manufacturer Nr.
SFAW-32-S13-E-PNLK-PNVBA-M12
Flow Sensor
Frequently Bought Together
-
This Item:
€331.34Excl. 19% VAT , excl. Shipping Cost
-
Festo SASA-FW-A-32-TG34 (8036892) Fluid Connector Set
€22.95Excl. 19% VAT , excl. Shipping Cost
-
Festo 565399. Flow sensor SFAB-200U-WQ10-2SA-M12
€424.52Excl. 19% VAT , excl. Shipping Cost
Total price
| Permission | RCM mark c UL us - Listed (OL) |
| CE certificate (see declaration of conformity) | acc. to EU-EMV Directive acc. to EU-RoHS Directive |
| KC-mark | KC-EMV |
| Material information | RoHs compliant |
| Measured parameter | flow temperature |
| Flow direction | P1 -> P2 Uni-directional |
| Measurement process | temperature: PT1000 Flow: Vortex |
| Flow measurement range starting value [l/min] | 1,8 |
| Flow measurement range end value [l/min] | 32 |
| Operating pressure [bar] | 0 to 12 |
| Information about operating pressure | max. 12 bar at 40°C max. 6 bar at 100°C |
| Operating medium | Fluid media Neutral liquids Water |
| Information about operating and control medium | Media compatibility to the media contacting materials must be guaranteed |
| Medium temperature [°C] | 0 to 90 |
| ambient temperature [°C] | 0 to 50 |
| Nominal temperature [°C] | 23 |
| Accuracy flow value | ±2 %FS for flow <= 50 %FS ± 3 % o.m.v. for flow >= 50 %FS |
| Accuracy temperature in ± °C [°C] | 2 |
| Repeatability flow value | < ±0.5 %FS for flow <= 50 %FS < ±1 % o.m.v. for flow >= 50 %FS |
| Temperature coefficient clamp in ± %FS/K | type ±0,05%FS/K |
| Control output | 2 x PNP or 2 x NPN switchable |
| Switch function | Window comparator Threshold comparator Freely programmable |
| Switching element function | Opener/closer switchable |
| Max. output current [mA] | 100 |
| Analogue output | 0 - 10 V 4 - 20 mA 1 - 5 V |
| Flow characteristic curve starting value [l/min] | 0 |
| Flow characteristic curve end value [l/min] | 32 |
| Max. load resistance current output [Ohm] | 500 |
| Min. load resistance voltage output [kOhm] | 15 |
| Short circuit resistance | yes |
| Overload resistant | Available |
| Report | IO-Link |
| IO-Link, report | Device V 1.1 |
| IO-Link, profile | Smart sensor profile |
| IO-Link, function classes | Teach channel Diagnosis Identification Binary data channel (BDC) Process data variables (PDV) |
| IO-Link, communication mode | COM2 (38.4 kBaud) |
| IO-Link, SIO mode support | yes |
| IO-Link, port type | A |
| IO-Link, process data width OUT | 0 Bytes |
| IO-Link, process data width IN | 3 Bytes |
| IO-Link, process data contents IN | 1 bit BDC (Volume monitoring) 14 bit PDV (Flow measurement) 2 bit BDC (Flow monitoring) |
| IO-Link, service data unit IN | 32 bit Volumenmesswert |
| IO-Link, minimum cycle time | 5 ms |
| IO-Link, data memory needed [Byte] | 500 |
| Operating voltage range DC [V] | 18 to 30 |
| Reverse polarity protection | for all electrical connections |
| Electrical connection | M12x1 5 pin Plug straight A-coded |
| Max. line length | 30 m 20 m For OK link operation |
| installation position | arbitrary |
| Fluid connection | Hose screw connection 13 mm |
| Product weight [g] | 300 |
| Housing material | PA reinforced |
| From medium contacting materials | EPDM (perox.) ETFE stainless steel PA6T/6I reinforced |
| Presentable unit(s) | US gal US gal/min cft cft/min l l/h l/min m3 °C °F |
| Protection category | IP65 |
| Corrosion resistant class KBK | 3 - severe corrosion stress |
| Manufacturer Nr. | SFAW-32-S13-E-PNLK-PNVBA-M12 |
|---|---|
| Manufacturer | Festo |
| GPSR manufacturer information | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| EAN | 4052568285357 |
| Weight | 0.550000 |
| HS-Code | 90261021 |
| Article authenticity | Original product |
| Condition of article | New |
Download
Customers Who Bought This Item Also Bought
Festo SFAW-32-CS515-E-PNLK-PNVBA-M12 (8036883) Flow Sensor
€331.34
Excl. 19% VAT ,
excl. Shipping Cost
