Festo 8036878. Flow sensor SFAW-100T-TG1-E-PNLK-PNVBA-M12
€420.54
Excl. 19% VAT ,
excl. Shipping Cost
Article
FES-8036878
Manufacturer Nr.
SFAW-100T-TG1-E-PNLK-PNVBA-M12
Flow sensor
Frequently Bought Together
-
This Item:
€420.54Excl. 19% VAT , excl. Shipping Cost
-
Festo 8058477. Flow sensor SFAH-200U-Q8S-PNLK-PNVBA-L1
€261.89Excl. 19% VAT , excl. Shipping Cost
-
Festo SASA-FW-A-32-TN12 (8036899) Fluid Connector Set
€22.95Excl. 19% VAT , excl. Shipping Cost
Total price
| Symbol | 00995566 |
| Approval | RCM trademark c UL us listed (OL) |
| CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive |
| CE marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions |
| Note on materials | RoHS-compliant |
| Measured variable | Flow rate Temperature |
| Flow direction | Unidirectional P1 -> P2 |
| Measurement method | Flow: Vortex Temperature: PT1000 |
| Start value for flow rate measuring range | 5 l/min |
| End value for flow rate measuring range | 100 l/min |
| Temperature measurement start value | 0 °C |
| Temperature measurement end value | 90 °C |
| Operating pressure | 0 MPa ... 1.2 MPa |
| Operating pressure | 0 bar ... 12 bar |
| Note on operating pressure | Max. 1.2 MPa (12 bar / 174 psi) at 40 °C Max. 0.6 MPa (6 bar / 87 psi) at 90 °C |
| Overload pressure | 4 MPa |
| Overload pressure | 40 bar |
| Overload pressure | 580 psi |
| Operating medium | Liquid media Water Neutral fluids |
| Note on operating and pilot medium | Media with a kinematic viscosity = 1.8 mm²/sec. [cSt]. Compatibility of the media with the substances in contact with the media must be ensured. |
| Media temperature | 0 °C ... 90 °C |
| Ambient temperature | 0 °C ... 50 °C |
| Nominal temperature | 23 °C |
| Accuracy of flow rate | ± 2% FS for flow rate <= 50% FS ± 3% of measured value for flow rate >= 50% FS |
| Accuracy temperature in ± °C | 2 °C |
| Repetition accuracy of flow rate | < ± 0.5% FS for flow rate <= 50% FS < ± 1% o.m.v. for flow rate >= 50% FS |
| Temperature coefficient span in ± %FS/K | Typ. ± 0.05%FS/K |
| Switching output | 2 x PNP or 2 x NPN, switchable |
| Switching function | Window comparator Threshold value comparator Freely programmable |
| Switching element function | N/C or N/O contact, switchable |
| Max. output current | 100 mA |
| Analogue output | 0 - 10 V 4 - 20 mA 1 - 5 V |
| Flow characteristic curve start value | 0 l/min |
| Flow characteristic curve end value | 100 l/min |
| Temperature characteristic curve start value | 0 °C |
| Temperature characteristic curve end value | 100 °C |
| Max. load resistance current output | 500 Ohm |
| Min. load resistance voltage output | 15 kOhm |
| Short circuit current rating | yes |
| Overload protection | Available |
| Protocol | IO-Link® |
| IO-Link, Protocol version | Device V 1.1 |
| IO-Link, Profile | Smart sensor profile |
| IO-Link, Function classes | Binary data channel (BDC) Process data variable (PDV) Identification Diagnostics Teach channel |
| IO-Link, communication mode | COM2 (38.4 kBaud) |
| IO-Link, SIO-Mode support | Yes |
| IO-Link, Port class | A |
| IO-Link, Process data length OUT | 0 bytes |
| IO-Link, Process data length IN | 5 bytes |
| IO-Link, Process data content IN | 1 bit BDC (temperature monitoring) 1 bit BDC (volume monitoring) 14 bit PDV (measured flow value) 14 bit PDV (measured temperature value) 2 bit BDC (flow monitoring) |
| IO-Link, Service data IN | 32-bit volume measurement |
| IO-Link, Min. cycle time | 5 ms |
| IO-Link, Data storage required | 500 Byte |
| Operational voltage range DC | 18 V ... 30 V |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Plugs |
| Electrical connection 1, connector system | M12x1, A-coded to EN 61076-2-101 |
| Electrical connection 1, number of connections/cores | 5 |
| Electrical connection 1, type of mounting | Screw-type lock |
| Electrical connection 1, connection pattern | 00995383 |
| Max. cable length | 20 m with IO-Link® operation 30 m |
| Mounting position | optional |
| Fluid connection | Female thread G1 |
| Product weight | 400 g |
| Material housing | PA-reinforced |
| Material in contact with the medium | EPDM (peroxide) ETFE Stainless steel PA6T/6I reinforced |
| Displayable units | US gal US gal/min cft cft/min l l/h l/min m3 °C °F |
| Degree of protection | IP65 |
| Corrosion resistance class CRC | 3 - high corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Manufacturer Nr. | SFAW-100T-TG1-E-PNLK-PNVBA-M12 |
|---|---|
| Manufacturer | Festo |
| GPSR manufacturer information | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| EAN | 4052568285340 |
| Weight | 0.470000 |
| HS-Code | 90261021 |
| Article authenticity | Original product |
| Condition of article | New |
Download
Customers Who Bought This Item Also Bought
Festo SFAW-32T-S13-E-PNLK-PNVBA-M12 (8036880) Flow Sensor
€407.81
Excl. 19% VAT ,
excl. Shipping Cost
Festo 8036873. Flow sensor SFAW-32-TG34-E-PNLK-PNVBA-M12
€331.34
Excl. 19% VAT ,
excl. Shipping Cost
