Festo 1501325. Motor controller CMMP-AS-C2-3A-M3
€1,701.48
Excl. 19% VAT ,
excl. Shipping Cost
Article
FES-1501325
Manufacturer Nr.
CMMP-AS-C2-3A-M3
Motor controller
Frequently Bought Together
-
This Item:
€1,701.48Excl. 19% VAT , excl. Shipping Cost
-
Festo 1501327. Motor controller CMMP-AS-C5-11A-P3-M3
€2,580.81Excl. 19% VAT , excl. Shipping Cost
-
Festo 3929314. Positioner CMSX-P-S-C-U-F1-D-130-C
€696.22Excl. 19% VAT , excl. Shipping Cost
Total price
| Type of mounting | On sub-base Screw-clamped |
| Product weight | 2100 g |
| Display | 7-segment display |
| Approval | RCM trademark c UL us listed (OL) |
| CE mark (see declaration of conformity) | To EU EMC Directive To EC Machinery Directive To EU Low Voltage Directive In accordance with EU RoHS Directive |
| CE marking (see declaration of conformity) | To UK instructions for EMC To UK regulations for machines To UK regulations for electrical equipment To UK RoHS instructions |
| Storage temperature | -25 °C ... 70 °C |
| Ambient temperature | 0 °C ... 40 °C |
| Relative air humidity | 0 - 90% |
| Degree of protection | IP10 IP20 |
| Pollution degree | 2 |
| Note on materials | RoHS-compliant |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Phases of nominal operating voltage | Single-phase |
| Nominal operating voltage AC | 230 V |
| Permissible voltage fluctuations | +/- 10 % |
| Mains frequency | 50 Hz ... 60 Hz |
| Nominal current | 2 A ... 3 A |
| Mains filter | Integrated |
| Max. intermediate circuit voltage DC | 320 V |
| Brake resistance | 60 Ohm |
| Pulse power, brake resistance | 2.8 kVA |
| Nominal voltage for logic power supply DC | 24 V |
| Permissible range for logic voltage | ± 20 % |
| Current consumption of logic power supply without clamping brake | 0.55 A |
| Output voltage class AC | 3x 0 - 270 V |
| Nominal output current | 2.5 A |
| Nominal current per phase, effective | 2.5 A |
| Peak current per phase, effective | 5 A |
| Max. peak current duration | 5 s |
| Controller nominal output | 500 VA |
| Maximum output | 1000 VA |
| Output frequency | 0 Hz ... 1000 Hz |
| Parameterisation interface | Parameterisation and commissioning USB Ethernet |
| Fieldbus link | CANopen DeviceNet EtherCAT EtherNet/IP Modbus/TCP PROFINET Profibus DP |
| Communication profile | DS301/DSP402 FHPP |
| Process interfacing | I/O coupling For 256 position sets |
| Max. fieldbus transmission rate | 1 Mbit/s |
| Bus connection | Plugs 9-pin Sub-D |
| Encoder interface output, features | Resolution 16384 ppr |
| Encoder interface output, function | Actual value feedback via encoder signals in speed control mode. Setpoint specification for downstream slave drive. |
| Encoder interface input, features | 3-phase encoder signals EnDat HIPERFACE RS422 SINCOS |
| Encoder interface input, function | Setpoint speed value as encoder signal Specifies the speed of the slave drive in synchronous mode. |
| Number of digital logic inputs | 10 |
| Features of logic input | Galvanically isolated Freely configurable |
| Working range of logic input | 8 V ... 30 V |
| Number of digital logic outputs 24 V DC | 5 |
| Features of digital logic outputs | Galvanically isolated Freely configurable in some cases |
| Max. current digital logic outputs | 100 mA |
| Number of analogue setpoint inputs | 2 |
| Features of setpoint inputs | Differential inputs Configurable for speed Configurable for current |
| Working range setpoint input | ± 10 V |
| Impedance of setpoint input | 20 kOhm |
| Number of analogue monitor outputs | 2 |
| Working range of monitor outputs | ± 10 V |
| Resolution of monitor outputs | 9 bit |
| Features of monitor outputs | Short-circuit proof |
| Manufacturer Nr. | CMMP-AS-C2-3A-M3 |
|---|---|
| Manufacturer | Festo |
| GPSR manufacturer information | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| EAN | 4052568237899 |
| Weight | 2.500000 |
| HS-Code | 85044085 |
| Article authenticity | Original product |
| Condition of article | New |
Download
Customers Who Bought This Item Also Bought
