Festo 567347. Control block CPX-CEC-C1
€637.00
Excl. 19% VAT ,
excl. Shipping Cost
Article
FES-567347
Manufacturer Nr.
CPX-CEC-C1
Control block
Frequently Bought Together
-
This Item:
€637.00Excl. 19% VAT , excl. Shipping Cost
-
Festo 560361. Analogue module CPX-4AE-P-B2
€455.79Excl. 19% VAT , excl. Shipping Cost
-
Festo 2798071. Bus node CTEU-EP
€404.51Excl. 19% VAT , excl. Shipping Cost
Total price
| Protocol | CODESYS Level 2 EasyIP Modbus® TCP TCP/IP |
| Dimensions (W x L x H) | 50 x 107 x 55 mm |
| Product weight | 155 g |
| Ambient temperature | -5 °C ... 50 °C |
| Storage temperature | -20 °C ... 70 °C |
| Relative air humidity | 95 % Non-condensing |
| Degree of protection | IP65 IP67 |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Note on materials | RoHS-compliant |
| Material housing | PA-reinforced PC |
| LED display, product-specific | ERR: PLC runtime error M: Modify/forcing active PL: Load supply PS: Electronics supply, sensor supply RUN: PLC status SF: System fault STOP: PLC status |
| LED display, bus-specific | TP: Link/traffic |
| Device-specific diagnostics | Channel-oriented and module-oriented diagnostics Undervoltage/short circuit of modules Diagnostic memory |
| Operator controls | DIL switch for CAN termination Rotary switch for RUN/STOP |
| IP address setting | DHCP Via CODESYS Via MMI |
| Fieldbus interface | CAN bus |
| Field bus interface, connection system | Plugs Sub-D 9-pin |
| Field bus interface, electrical isolation | yes |
| Field bus interface, transmission rate | 125, 250, 500, 800, 1000 kbit/s Can be set using software |
| Ethernet interface | RJ45 (socket, 8-pin) |
| Ethernet, number | 1 |
| Ethernet, supported protocols | TCP/IP, EasyIP, Modbus TCP |
| Ethernet, plug connector | RJ45 Bushing 8-pin |
| Ethernet, data transmission rate | 10/100 Mbit/s |
| Parameterisation | CoDeSys V2.3 |
| Baud rate | 10/100 bit/s to IEEE 802.3 (10BaseT) or 802.3u (100BaseTx) |
| Configuration support | CODESYS V2.3 |
| Additional functions | Diagnostic functions Motion functions for electric drives |
| CPU data | 32 MB flash 32 MB RAM 400 MHz processor |
| Control-Interface | CAN bus |
| Nominal operating voltage DC | 24 V |
| Nominal DC operating voltage, load voltage | Without pneumatic components: 18 ... 30 V 24 V With pneumatics type midi/maxi: 21.6 ... 26.4 V With pneumatics type CPA: 20.4 ... 26.4 V With pneumatics type MPA: 18 ... 30 V |
| Intern power consumption nominal operating voltage | Typ. 85 mA |
| Power failure bridging | 10 ms |
| Programming, operating language | DE, EN |
| Programming language | To IEC 61131-3 KOP AWL ST FUP AS Additionally CFC |
| Programming, support for file handling | yes |
| Programming software | CODESYS provided by Festo V2.3 |
| Program memory | 4 MB user program |
| Processing time | Approx. 200 µs/1 k instruction |
| Function modules | Read CPX module diagnostics CPX diagnostic status Copy CPX diagnostic trace And others |
| Flag | 30 kB remanent data 8 MB global data memory CODESYS variable concept |
| Total number of axes | 31 |
| Manufacturer Nr. | CPX-CEC-C1 |
|---|---|
| Manufacturer | Festo |
| GPSR manufacturer information | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| EAN | 4052568215088 |
| Weight | 0.185000 |
| HS-Code | 85371091 |
| Article authenticity | Original product |
| Condition of article | New |
Download
Customers Who Bought This Item Also Bought
