K-214108. Tilt lever valve 2/2-way, G 1/4"-10x8 mm
€20.78
Excl. 19% VAT ,
excl. Shipping Cost
Article
FL-K-214108
Manufacturer Nr.
K 214108
Tilt lever valve 2/2-way, G 1/4"-10x8 mm
Frequently Bought Together
-
This Item:
€20.78Excl. 19% VAT , excl. Shipping Cost
-
RSV-18/I18. Air saving valve G 1/8"-G 1/8"
€40.29Excl. 19% VAT , excl. Shipping Cost
-
STOP-38. Pilot operated check valve without manual emergency operation, G 3/8" (female thread / male thread)
€43.46Excl. 19% VAT , excl. Shipping Cost
Total price
Materials:
Body: Nickel-plated brass, internal parts: brass / stainless steel, seal: NBR
Temperature range:
-5°C to +70°C
Operating pressure:
0 - 8 bar (banjo valve 2/2-way and 3/2-way with pressure inlet ring piece: 0 - 10 bar)
Media:
lubricated and unlubricated, filtered compressed air, neutral gases
Advantages:
•low price,
•extensive application options,
•simple and fast setting up of a circuit,
•rocker lever can be positioned
Application:
To actuate single-acting cylinders, screw the 3/2-way valve (K 3...) directly in the cylinder.
Required mounting hole for panel mounting:
Ø 12.5 mm, maximum sheet thickness: 4 mm (bulkhead thread: M 12x1, tie-rod valve 2/2-way and 3/2-way with pressure inlet ring piece: M 12x0.75)
Body: Nickel-plated brass, internal parts: brass / stainless steel, seal: NBR
Temperature range:
-5°C to +70°C
Operating pressure:
0 - 8 bar (banjo valve 2/2-way and 3/2-way with pressure inlet ring piece: 0 - 10 bar)
Media:
lubricated and unlubricated, filtered compressed air, neutral gases
Advantages:
•low price,
•extensive application options,
•simple and fast setting up of a circuit,
•rocker lever can be positioned
Application:
To actuate single-acting cylinders, screw the 3/2-way valve (K 3...) directly in the cylinder.
Required mounting hole for panel mounting:
Ø 12.5 mm, maximum sheet thickness: 4 mm (bulkhead thread: M 12x1, tie-rod valve 2/2-way and 3/2-way with pressure inlet ring piece: M 12x0.75)
| Manufacturer Nr. | K 214108 |
|---|---|
| Manufacturer | Fluidics equipment |
| EAN | 4050571391607 |
| Weight | 0.070000 |
| HS-Code | 84812090 |
| Article authenticity | Original product |
| Condition of article | New |
Customers Who Bought This Item Also Bought
MHZ-360-24V. Banjo bolt solenoid valve G 1/8"-6, 3/2-way (NC), 24V DC
€37.95
Excl. 19% VAT ,
excl. Shipping Cost
MHO-3186-12V. Banjo bolt solenoid valve G 1/8"-8x6, 3/2-way (NO), 12V DC
€44.86
Excl. 19% VAT ,
excl. Shipping Cost
MHZO-240-115V. Banjo bolt solenoid valve G 1/8"-4, 2/2-way (normally open), 115V AC
€47.58
Excl. 19% VAT ,
excl. Shipping Cost
MH-360-24V. Banjo bolt solenoid valve G 1/8"-6, 3/2-way (NC), 24V DC
€35.55
Excl. 19% VAT ,
excl. Shipping Cost
MHZO-360-12V. Banjo bolt solenoid valve G 1/8"-6, 3/2-way (NO), 12V DC
€45.21
Excl. 19% VAT ,
excl. Shipping Cost
MHO-280-115V. Banjo bolt solenoid valve G 1/8"-8, 2/2-way (normally open), 115V AC
€44.47
Excl. 19% VAT ,
excl. Shipping Cost
MHO-280-230V. Banjo bolt solenoid valve G 1/8"-8, 2/2-way (normally open), 230V AC
€44.47
Excl. 19% VAT ,
excl. Shipping Cost
MHZ-318-24V. Banjo bolt solenoid valve G 1/8"-G 1/8", 3/2-way (NC), 24V DC
€38.84
Excl. 19% VAT ,
excl. Shipping Cost